-
Product
SSD
CFAST-B-XXG-SI
-
The CFAST-B-XXG-SI is a USA-made product line of Industrial SLC-based CFast memory cards. These small form factor CFast cards provide SATA level performance while featuring robust features needed for industrial applications. These cards contain a locked-down Bill of Materials to ensure consistent product performance and future compatibility.
-
Product
Industrial SSD PCIe Interface
-
Advantech SQFlash industrial storage modules support the latest NVMe PCIe interface SSDs such as M.2 and U.2 for industrial applications requiring high performance. Also Mini PCIe form factor is available for general embedded applications.
-
Product
2.5 inch SATA SSD for Industrial Embedded Applications
2.5 inch SATA SSD Series
-
ADLINK’s industrial 2.5 inch SATA SSD Series delivers all the advantages of today’s flash disk technologies with SATA 6Gb/s interface, and is fully compliant with the standard 2.5" form factor, providing low power consumption and hot-swap capability. Capacities of up to 2TB are available and read/write speeds of up to 560MB/s and 500MB/s respectively are supported.
-
Product
XMC-PCIeStor, High Speed PCIe Single SSD Adapter
9301
-
The 9301 is a VITA 42.3 XMC adapter card / mezzanine storage module with a single M.2 SSD site. The M.2 site supports up to 4 lanes of PCIe Gen 2 connectivity at 5 Gb/s per lane when a Gen 2 or 3 capable M.2 PCIe card is used.
-
Product
SQFlash 840V Series Industrial 2.5" SATA SSD
SQF-S25 840V
Solid-State Drive
GUI management tool & software API package, Shock resistance, anti-vibration and low power consumption. Support for voltage stabilizer, Support AES256 and Quick Erase. Supports Fragment Writing and Flush Manager, Support LDPC with RAID ECC. Compliant with SATA III and SATA v3.2 standard.
-
Product
SQFlash 660BR Series Industrial 2.5" SATA SSD
SQF-S25 660BR
-
SQFlash 660BR series industrial 2.5" SATA SSD, Backup & Recovery function support. Compliant with SATA III and SATA v3.2 standard, Support hardware GPIO and software triggering. Logical Block Recovery, Supports LDPC & RAID ECC. GUI management tool & software API package.
-
Product
Arowana PCI Express SSD Board™ Family 2U x16 (x8) PCI Express Gen 3 SSD board
-
The Arowana PCI Express SSD board incorporate up to eight independent x4 PCI express Gen 3 SSDs. The operating system recognizes each SSD as an individual hard disk and can combine them in RAID0 to gain maximum performance.
-
Product
SQFlash 650 M.2 2280 SATA SSD, SATA Gen. 3 (6.0Gbps)
SQF-S8B 650
-
SATA 3.2 Compliant, AES-256 Support & TCG-OPAL Compliant. Support HW and FW Write Protection, Supports LDCP & RAID ECC. GUI management tool & software API package, Multiple Temperature Range Product Selection.
-
Product
2.5'' SSD
-
A standard, compact storage drive size designed to fit the same bays as traditional laptop hard drives, measuring roughly 2.5 inches in width.
-
Product
SQFlash 930 M.2 2280 PCIe/NVMe Gen.4 X4 SSD, Enterprise Series
SQF-C8M 930L
-
Compliant with PCIe Gen.4 x4 interface and NVMe 1.4, 5Y DWPD >1 High Endurance. Power Loss Protection, AES-256 Support & TCG-OPAL Compliant. Support LDPC with RAID ECC, SMART and GUI management tool.
-
Product
SSD
MSATA SSD (MLC) 3ME4 Series
-
Innodisk mSATA 3ME4 is SATA III 6.0 Gb/s flash based disk, which adopts latest Marvell NAND controller with Innodisk’s exclusive L³ FW architecture. The upgraded L³ FW architecture, combining Innodisk signature 4K mapping algorithm L² FW architecture with powerful LDPC technology, makes 3ME4 series have outstanding high IOPS, better data integrity and extended lifespan through reducing the bad block number happening. Built-in thermal sensor, and iData Guard ensure data integrity and reliability of mSATA 3ME4 for industrial applications.
-
Product
SQFlash EU-2 PCIe/NVMe E3.S SSD, Enterprise Series
SQF-CE3 EU-2
Solid-State Drive
EDSFF E3.S 1C PCIe/NVMe SSD, Compliant with PCIe Gen.5 x 4 interface and NVMe Express 2.0. AES-256 Support & TCG-OPAL Compliant, Support LDPC with RAID ECC. Heat-spreading design with thermal solution, SMART and GUI management tool.
-
Product
SSD Test Systems
MPT3000ES / MPT3000ES2
Test System
Using the same high-performance electronics and powerful software as all products in the MPT3000 family, the MPT3000ES and MPT3000ES2 engineering stations feature a small footprint configured to test up to eight SSDs in parallel. The system's small size and ability to plug into a standard AC outlet enable users to conduct program development and interactive device debugging in either office or lab settings.
-
Product
SQFlash 920 U.2 2.5" SSD (SFF-8639) PCIe/NVMe Gen.3 X4
SQF-C25 920
-
GUI management tool & software API package, TRIM、AHCI supported. U.2 (SFF-8639) PCIe/NVMe 2.5" SSD, Support LDPC with RAID ECC. Compliant with PCIe Gen.3 x4 interface and NVMe 1.3.
-
Product
XMC-PCIeStor, High Speed PCIe Quad M.2 SSD Adapter
9303
-
The 9303 is an air or conduction cooled, extended temperature XMC card with 4 M.2 SSD sites for multi-terabyte storage. Onboard Gen2 PCI Express (PCIe) switch connects one 4-lane upstream PCIe port to four 1-lane downstream ports.
-
Product
Squid Carrier Board™ Family PCI Express Gen 3 Carrier Board for 4 M.2 PCIe SSD Modules
SKU-086-34
-
PCIe Carrier board was designed to expand modern motherboards that have PCIe interface. It allows connection of up to 4 M.2 PCI Express SSD modules.PCIe Carrier board is one-slot-wide, half-height and it compliant with PCIe Specification 3.0 and M.2 Specification 1.1.
-
Product
Squid Carrier Board™ Family PCI Express Gen 3 Carrier Board for six M.2 or NGSFF (NF1) PCIe SSD Modules
SKU-086-36
-
This Squid PCIe Carrier board can support up to six M.2 or NGSFF (NF1) PCIe SSD (solid state drive) modules, with M-key. Supported module dimensions are 2280 or 22110 in length, and a width of up to 32 mm. SSD modules of any capacity may be used, from any vendor, and in any combination.
-
Product
Arowana PCI Express SSD Board Family x1 PCI Express Gen 3 SSD Board
SKU-090-31-x1
-
The Arowana PCI Express SSD board is the smallest carrier board on the market. This PCI Express Carrier board was designed to expand modern motherboards or embedded systems that have a PCI Express interface. It can also be vertically installed in any 1U servers or appliances.
-
Product
NGFF M.2 2280 SSD Module
SQF-SM8 830
-
SQFlash 830 M.2 2280 SATA SSD. Compliant with SATA III and SATA v3.2 standard. Supports 120 bit ECC correct per 2K Byte data. Quad core processor with stable throughput. Preserved pin on M.2 connector for Voltage Stabilizer support from main board.
-
Product
Squid Carrier Board™ Family PCI Express Gen 2 Carrier Board for 4 PCIe M.2 SSD Modules
SKU-086-01
-
The Squid PCI Express Carrier board for M.2 SSD modules is the second product in the Squid PCI Express Carrier Board™ family. PCI Express Carrier board was designed to expand modern motherboards that have PCI Express interface. It allows connection of up to 4 M.2 PCI Express SSD modules. This product is recommended for use in Mac Pro Desktop computers.
-
Product
Industrial 2.5" SATA SSD, FIPS 140-2 Certified
SQFFS25 840F
-
Compliant with SATA III and SATA v3.2 standard, Support LDPC with RAID ECC. Support AES-256 and FIPS verify, Shock resistance, anti-vibration.
-
Product
M12 Mezzanine for SC4/5 M.2 NVMe SSD PCIe x4, 4 x M12 Gbe
SCL-RHYTHM
-
The SCL-RHYTHM is a mezzanine card for EKF SC4/5 CPU boards, with a socket for PCI Express® M.2 NVMe SSD PCIe x4 mass storage module, and four independent M12 Gigabit Ethernet controllers for universal networking. Suitable for M.2 S1-S5 / D1-D5.
-
Product
XMC-PCIeStor High Speed PCIe Triple M.2 SSD Adapter
9302
-
The 9302 is a VITA 42.3 XMC adapter card with three M.2 SSD sites. Each M.2 site supports one lane of PCIe Gen 2 connectivity at 5 Gb/s per lane when a Gen 2 or 3 capable M.2 PCIe card is used.
-
Product
SSD
MSATA SSD (iSLC) 3IE4 Series
-
Innodisk mSATA 3IE4 is SATA III 6.0 Gb/s flash-based disk, which adopts the latest Marvell NAND controller with Innodisk’s exclusive L³ FW architecture. The upgraded L³ FW architecture, combining Innodik signature 4K mapping algorithm L² FW architecture with powerful LDPC technology, makes 3IE4 series have outstanding high IOPS, better data integrity, and extended lifespan by reducing the occurrence of bad block numbers. Built-in thermal sensor and iData Guard ensure data integrity and reliability of mSATA 3IE4 for industrial applications.
-
Product
SQFlash 650 M.2 2242 SATA SSD, SATA Gen. 3 (6.0Gbps)
SQF-S4B 650
Solid-State Drive
SATA 3.2 Compliant, AES-256 Support & TCG-OPAL Compliant. Support FW Write Protection, Supports LDCP & RAID ECC. GUI management tool & software API package, Multiple Temperature Range Product Selection.
-
Product
Squid PCI Express Carrier Board™ for M.2 and NGSFF (NF1) SSD Modules
-
Amfeltec Squid PCI Express Carrier Board™ for M.2 and NGSFF (NF1) SSD Modules
-
Product
SQFlash 720 M.2 2242 PCIe/NVMe Gen.3 X4 SSD
SQF-C4M 720
Solid-State Drive
NGFF M.2 2242 SSD (M key) Compliant with PCIe Gen. III x4 interface and NVMe 1.3 Support LDPC with RAID ECC, TRIM supported, GUI management tool & software API package.
-
Product
SQFlash ER-1 U.2 2.5" SSD (SFF-8639) PCIe/NVMe Gen.4 X4, Edge Grade
SQF-CU2 ER-1
Solid-State Drive
U.2 (SFF-8639) PCIe/NVMe 2.5" SSD, Compliant with PCIe Gen. 4 x 4 interface and NVMe 1.4, AES-256 Support & TCG-OPAL Compliant. Support LDPC with RAID ECC, Read-Intensive and Mixed-Use support. Heat-spreading design with thermal solution, SMART and GUI management tool.
-
Product
SQFlash 930L E1.S PCIe/NVMe Gen.4 X4 SSD, Enterprise Grade
SQF-CE1 930L
-
Compliant with PCIe Gen.4 x4 interface and NVMe 1.4, 5Y DWPD >1 High Endurance. Added Power Loss Protection, AES-256 Support & TCG-OPAL Compliant. Support LDPC with RAID ECC, SMART and GUI management tool.
-
Product
SQFlash 660 M.2 2242 SATA SSD, SATA Gen. 3 (6.0Gbps)
SQF-S4B 660
-
SATA 3.2 Compliant, Supports LDCP & RAID ECC. SMART, SQLog & SQAnalyzer for diagnosis, GUI management tool & software API package. -20 to +75 °C operation temperature, and can withstand peak up to -40℃ or 85℃ for 1hr.





























