Wafer Level
-
Product
Sound Level Calibrator
521
-
Accepted internationally 1 kHz represents the "0 dB" reference point of A, B, C Weighting and other filters utilized in acoustic measurement. The Pistonphone - a mechanical sound source - offers a slightly higher degree of accuracy at a substantial increase in cost. In addition, the 200 or 250 Hz operating frequency is mechanically limited and not suited for measurements of filtered inputs. The 0.2 dB accuracy is quickly lost in the 0.7 to 1.5 dB tolerances acceptable for weighting filters at frequencies around 250 Hz.
-
Product
Die-To-Wafer Bonding Systems
-
Several different D2W bonding methods are available and selected depending upon the application and customer requirements. In direct placement D2W (DP-D2W) bonding, the singulated dies are bonded to the target wafer one by one using a pick-and-place flip-chip bonder. Plasma activation and cleaning of the surfaces of the dies on the handler wafer are essential steps for establishing a high-yielding bond and electrical interface between the dies and target wafer. This is where the EVG320 D2W activation system comes in.
-
Product
Loop and Line Powered Level Switch
Safety IntelliPoint
-
The Safety IntelliPoint level switch provides a capacitance probe level switch with either a current output or relay contacts and “On-Board” self-diagnostics to ensure reliability. This SIL Intellipoint conforms to SIL 2 specifications providing the ultimate in level switch integrity and level sensing elements for a wide variety of temperatures, pressures, and materials.
-
Product
High Resolution Wafer Thickness & Thickness Variation Gauge
MX 10x series
-
The MX10x series measure thickness and thickness variation on silicon wafers. It has a resolution of 10 nanometers and can be adapted to different thickness ranges within a few seconds.
-
Product
Trace Level Chemiluminescence NO-NOy Analyzer
Model T200U NOY
-
Teledyne Advanced Pollution Instrumentation
The Model T200U NOy analyzer has been developed and refined specifically to address the challenges of NOy monitoring as required, for example, in the US NCore network. It uses the proven chemiluminescence principle and is coupled with a remote NOy converter via umbilical to allow measurements with a lower detectable limit of 50 ppt.The Model T200U NOy analyzer combines a gold plated reaction cell with an enhanced performance pump, special low noise photomultiplier tube, and unique signal conditioning to provide exceptional sensitivity. In addition, a pre-reactor separates the NO-O3 reaction from background chemiluminescence to allow accurate auto-zero of the analyzer. The remote NOy converter is provided with a stainless steel, NEMA 4X (IP65) enclosure and custom sample umbilical to allow a mounting height of 10 meters. In addition, the converter features a unique purge circuit designed to remove residual calibration gas.
-
Product
Sound Level Meter
DE-3301
-
LCD Display4 digits LCD DisplayLow Battery display on LCDMeasuring Range30~130dBFrequency WeightingA,CDynamic Range50dBFrequency Range31.5Hz~8kHzTime WeightingFast125 ms
-
Product
Digital Sound Level Meter
Model KM 926
-
Kusam Electrical Industries Limited
KM 926 designed according to the IEC 651 TYPE 2 & ANSI S1.4 TYPE 2 for sound level meter. Instantaneous sound measure function. Measurement Range : 30 ~ 130decibel. With two equivalent weighed sound pressure levels, A & C. Fast & Slow dynamic characteristic modes. AC & DC signed output for frequency analyzer level recorder, FFT analyzer, graphic recorder etc.
-
Product
DVB-Signal Level Meters
-
PeakTech Prüf- und Messtechnik GmbH
Is a comprehensive multifunction measuring device for channel levels from DVB systems. Channel searches for cable, satellite or terrestrial systems can be carried out, channel lists can be created and managed, or satellite systems can also be aligned.
-
Product
Sound Level Meter
3310 SL
-
Standard Electric Works Co., Ltd
Max. & Min. function. Over & under range indication. 4-digit LCD. Frequency weighting characteristic for 2 times per second. AC signal output. Low battery indication. Auto power off (10 minutes). Backlight function. 200 measurement results can be saved in the memory and recalled on the display. ● Indication of date, time.
-
Product
Class 1 Integrating Sound Level Meter
HD2010UC.kit1
-
The HD2010UC.Kit1 is a Class 1 integrating portable sound level meter performing statistical analyses. The instrument has been designed combining price competitiveness and simplicity of use. Attention has been paid to the possibility of updating the instrument, and the HD2010UC can be integrated, at any time, with other options like “Advanced Data Logger” to extend its application scope.
-
Product
Level Testing Instrument
LIKON
-
F. W. Breithaupt & Sohn GmbH & Co.KG
*Instrument to determine the sensitivity and precision of the level curvature in mounted or unmounted condition*Testing instrument for instruments up to 20kg*250x160mm tiltable base with micrometers*Measuring range +1500’’ bis -1000’’*Made in Germany
-
Product
Universal OTP Functional Test System for the Production of Level and Fluid Sensors
Functional Test
Multifunctional function tester with parallel test function based on the LXinstruments OTP2 system platform. The system is used for assembly, final test and calibration of liquid and level sensors for commercial vehicles, construction machinery and shipbuilding in a high mix / medium volume environment.
-
Product
Customized Semiconductor Wafer Inspection, Sorting & Metrology Equipment | Systems
Customized Solutions
-
Unique Needs? Need better wafer inspection throughput, accuracy, versatility? Need a wafer defect inspection expert who’s not a sales person? We’ve been providing complete semiconductor wafer inspection, sorter, and microscopes solutions to semiconductor wafer manufacturers since 1994.
-
Product
Laboratory EM current meter / water level and wave height meter
-
ACM2-RS and ACM3-RS are 2-D and 3-D electro-magnetic current meters for laboratory experiments. The models provide digital output, a high-speed sampling rate and insusceptibility to electro-magnetic noise. ACH-600RS is a highly sensitive capacitance water level meters. With the new system, a maximum of four different sensors can be connected to the compact interface unit, enabling simultaneous recording on a personal computer. Additionally, the system can provide analog output as well as necessary. While conventional water level and wave height meters cannot be used near velocity sensors, our instrument can be as near as 5 cm without increasing noise, due to its special isolated circuit. The result is an innovative system that is capable of achieving highly accurate data.
-
Product
Sound Level Meter
-
The Sound Level Meter is shown positioned near the top of the main Daqarta window. Like the Voltmeter and Frequency Counter, it can be positioned anywhere on the screen, and the size of the display font changes when you resize the meter by dragging its borders. You can fill the screen for a really big readout that can be seen from across the room.
-
Product
SparkFun Level Shifting MicroSD Breakout
-
The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting hardware, this board allows you to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system. With this small breakout board, that is not much bigger than your fingernail, adding mass storage to your project will never be easier.
-
Product
Level Switch
Z-Tron IV
-
The Z-Tron IV level switch is one of our most popular on/off level switches offering an effective, low-cost material level detection in a wide variety of applications. It is widely used as an alternative to electromechanical level switches.
-
Product
Sound Level Meters
-
Acoustic Data These definitions are intended simply as an aid to understanding and for this reason, some are not strictly scientifically accurate. For correct formal definitions, consult IEC standards 60651, 60804, 60942, 61252 and IEC 61672: 2003 part 1.
-
Product
Digital Sound Level Meter
732A
-
Whether you are testing for OSHA compliance, quieting equipment, or monitoring the roar of a stadium crowd, B&K Precision's Sound Level Meters can get the job done. The model 732A Sound Level Meter provides 30~130 dB capability in three convenient measurement ranges Low, Med and Hi with an accuracy of ±1.5 dB. The meter meets the IEC 651 Type II and includes frequency weighting A & C and fast and slow time weighting.
-
Product
Line Powered Level Switch
ThePoint
-
ThePoint Line Powered provides a relay output switch and has hazardous area approvals making it a good choice for most of your point level application requirements. ThePoint sensing element offering is suitable for most temperature, pressure, and material types.
-
Product
Sound Level Meters & Decibel Meters
-
Find high performance easy to use Class 1 or Class 2 sound level meters. Ideal professional-grade noise meters for accurate and compliant noise measurement for every application including occupational noise and environmental noise.
-
Product
Non-contact Measurement Wafer Sorting System (Belt Drive Tranceportation)
NC-6800
-
*Non-contact measurement of resistivity, thickness and conductivity (P/N)*Number of cassette station can be changed by customers request*Eddy current method for resistivity, Electric capacitance method for wafer thickness*Temperature correction for silicon wafer function
-
Product
Digital Signal Level Meter
RA2009D
-
Radiasun International Group Ltd.
RA2009D comes with a solution that can handle digital TV and maintain the analog spectrum, enable technicians to use it in the most demanding situations with a single, rugged instrument, wherever it is needed. The new QAM View digital analysis option adds forward path digital signal testing that includes constellation, pre/post FEC BER, MER. Analog signal measurements are addressed with standard features like RF signal level, full scan, TILT, in-service C/N, A/V, and FCC compliant autotesting.
-
Product
Sound Level Meters
HD 8701
-
The sound level meter HD 8701 is a portable instrument, easy and quick to use, suitable for measuring industrial and civil noise levels. The noise levels can be read easily in dB (A) on the large liquid crystal display which also shows all the information concerning the mode of operation of the instrument. One second after switching on and with a resolution of 0.1 dB, the digital reading gives the continuously updated value of the RMS sound pressure level, with a type A frequency weighting. The single range from 30 to 130 dB further simplifies the use of the instrument, as the user does not have to change scale.
-
Product
High-precision radar sensors for distance measurement, level measurement & collision avoidance
-
With our OndoSense apex and OndoSense reach radar sensors for distance measurement, level measurement & collision avoidance, you will benefit from the highest accuracy and measurement speed combined with an extremely robust radar technology for harsh industrial environments. The smart distance radar sensors provide great configuration features, a unique range of industrial applications and a wide measuring range.
-
Product
Trace Level Portable Gas Calibrator
Model T750U
-
Teledyne Advanced Pollution Instrumentation
The Model T750U is a portable, microprocessor based calibrator for precision trace-level gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750U is housed in a high-density, molded travel case which includes an integral handle and wheels for durability and ease of use in the field.
-
Product
Level & Pressure Transmitters
-
This series of low-pressure transducers is specifically designed for demanding industrial applications where the primary criteria are reliability and economy. These units provide repeatable, precision measurements under the most hostile condition.
-
Product
Sound Level Meters
-
A sound level meter is used for acoustic (sound that travels through air) measurements. It is commonly a hand-held instrument with a microphone. The diaphrahm of the microphone responds to changes in air pressure caused by sound waves.
-
Product
Scienlab Battery Test System – Module Level
SL1001A Series
Test System
The SL1001A and SL1006A Battery Test Systems – Module Level Series help you emulate sink and source for battery modules for automotive and industrial applications.
-
Product
ClearLine Level Switch
-
The ClearLine in-Line fluid detector is a point level switch that mounts directly into the process piping between two flat-faced flanges. This product is best suited for pump protection and low-level indication below vessels.
