-
product
MWIR Systems
L3 Cincinnati Electronics’ high-performance cooled mid-wave (3.5 – 5.0 µm) IR imagers are based on our patented InSb focal plane array architecture. Ideal for all combat conditions, L3 Cincinnati Electronics technology improves situational awareness in combat intelligence, sighting & tracking systems, threat deterrence and perimeter & border security with all-weather observation, day or night. These IR sensors can be utilized in urban, rural and remote situations where there are extreme climatic and terrain conditions. Well-suited for fixed or portable payloads, these imaging systems offer a substantially lower total life-cycle cost in comparison to other commercial IR imaging sensors.
-
product
Cooled MWIR High-Sensitivity Camera
FLIR GF335
If you need a mobile camera that can detect extremely subtle temperature differences, the FLIR GF335 Broadband is the camera for you. The GF335 is a high sensitivity, low noise, cooled thermal camera that excels at detecting faint heat signatures. It is well suited to a wide range of applications, including use on test ranges, non-destructive testing, research, and science applications.
-
product
High Resolution MWIR Camera Modules
Neutrino® Performance Series
The performance series includes the FLIR Neutrino QX and SX12. Neutrino SX12 is a 1280×1024/12 µm resolution focal plane array (FPA) and has a frame rate of 120 Hz at 720P and >60 Hz for SXGA. Neutrino QX is a 2048×1536/10 µm FPA and has a frame rate of 60 Hz at 1080P and >30 Hz for QXGA. Neutrino Performance Series is ideal for ground or airborne intelligence, surveillance and reconnaissance (ISR), targeting, counter-UAS solutions and Wide Area Motion Imagery (WAMI) applications. The industry-standard interfaces, simple and powerful software controls, complete product documentation and Teledyne FLIR technical support reduces product development risk and shortens time to market. The Neutrino is an OEM camera module that is intended to be integrated into a higher level system.
-
product
High Definition MWIR Science-Grade Camera
FLIR X8580™
The FLIR X8580 midwave IR camera is designed for scientists and engineers who need to capture detailed imagery of high-speed events, perform custom radiometric measurements, or detect points of failure in composites, solar cells, and electronics. This thermal imaging camera combines 1280 × 1024 HD resolution with fast frame rates and integration times, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X8580 will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.
-
product
Lenses for Mid-Wave Infrared (MWIR) Cameras for 3-5 µm
MWIR Zoom Lens Assemblies
Teledyne FLIR custom and off-the-shelf mid-wave infrared (MWIR) continuous zoom (CZ) optical assemblies and lenses are for integrators and operators who do not compromise on quality. All lens assemblies have near diffraction limited performance and include advanced features that ensure continuous focus through the zoom. Formerly New England Optical Systems (NEOS) and now part of Teledyne FLIR, the world-class technical services team provides product support and can also develop new or customize existing lens assemblies for a camera, application, and mission. Designed to maximize infrared-camera performance, the MWIR CZ lens assemblies provide the competitive advantages required in the field and marketspace for a wide range of defense, security, and commercial applications.
-
product
HOT MWIR Camera Module + Continuous Zoom Lens
Neutrino® IS Series
Neutrino IS series combines Teledyne FLIR’s world-class mid-wavelength infrared (MWIR) OEM camera modules and continuous zoom (CZ) lenses to offer high–performance imaging solutions with various FPA resolutions and CZ zoom/FOV ranges. Neutrino IS lowers development and manufacturing risk and improves time-to-market. Cutting-edge HOT FPAs, long life and low vibration linear coolers, common camera interfaces, and fully athermalized lenses make for the best-in-class solution. Each camera module and lens are designed for each other, providing optimal performance not achievable when buying and integrating cameras and lenses from multiple sources.
-
product
High-Speed MWIR Camera for Range & Science Applications
FLIR RS8500
The FLIR RS8500 MWIR infrared camera system is a high-performance thermal camera and infrared telescope combined in a single weatherproof housing, specifically designed for long-range tracking and measurement applications including military range, aerospace, and outdoor research. Built around a high-resolution 1280 × 1024 midwave indium antimonide detector with the ability to deliver data up to 180 frames per second, the RS8500 provides 24% more pixels and a 46% faster frame speed than the previous model. Multiple simultaneous data and video output options allow the camera to be easily integrated into most data acquisition systems.
-
product
Collimators
STC Series
The STC Series Off-axis Newtonian Collimators from Santa Barbara Infrared provide superior performance in a compact, light weight, readily integrated package. These collimators accurately project targets at infinite focus for critical visible, IR, SWIR, MWIR and LWIR system testing. STC Series Collimators integrate with SBIR’s Infinity Blackbodies and 300 Series target wheels to create the 14000 Series Target Projectors. These target projectors are available in many standard sizes to satisfy the test requirements of most sensor systems. Additionally, their modular design allows for easy customization of components.
-
product
High-Speed HD LWIR SLS Camera
FLIR X8500sc SLS
The FLIR X8500sc SLS is a highly sensitive, high definition LWIR camera designed for scientists, researchers, and engineers. The strained layer superlattice (SLS) detector offers HD resolution combined with shorter snapshot speeds, wider temperature bands, and better uniformity than current LWIR or MWIR alternatives. With advanced triggering and on-camera RAM/SSD recording, researchers can easily stop motion on high-speed events, whether they’re in the lab or on the test range.
-
product
High Speed IR Camera
TACHYON 1024 µCAMERA
*Miniaturized uncooled MWIR camera for industry*32×32 resolution*IP67 rated*Industrial M12 USB connector*1000 frames per second*CS-mount
-
product
Remote Weapon Systems Sight
ThermoSight® V4000
With decades of experience from designing and manufacturing exceptional military sights, Teledyne FLIR now offers powerful remote weapon sight. The cost-effective ThermoSight® V4000 based on cooled MWIR camera provides an impressive ability to engage and aim accurately on long range.
-
product
Multi-Mission EO/IR Surveillance Sensor
Star SAFIRE® III
With thousands of systems fielded, the Star SAFIRE III provides extremely reliable high performance. Along with superior image stabilization and long-range imaging, Star SAFIRE III features internal navigation for precise targeting, MWIR thermal imager, optional EO color and low-light cameras, and multiple laser payload options. The system is fully hardened for military fixed-wing and helicopter operations, and it operates continuously in all conditions – even while sitting on the tarmac with no airflow.
-
product
Remote Weapon Systems Sight
ThermoSight® V4000E
The ThermoSight® V4000E is a cooled midwave infrared (MWIR) sight for long-range remote weapon systems designed to maximize performance and stand off range. It has a wide field of view of 10 degrees to scan the scene for threats and targets a narrow 2 degrees field of view for target assessment and accurate timing. The ThermoSight® V4000E has superior automatic detail enhancement (ADE), a proven low-life cycle cost, and a fast and reliable calibration mode (NUC) for easy operation.
-
product
Large-Format/Wide-Area Surveillance Sensors
L3 Cincinnati Electronics is the industry leader in large-format MWIR with a decade of experience in providing IR technology for major programs such as the F/A-18 and F-35. In addition to our compact 1280 x 1024 and 2048 x 2048 pixel MWIR HD cameras, we are the only manufacturer with IR sensors of 16Mp (4096 x 4096 pixels) currently in use by U.S. assets in overseas combat zones.
-
product
High-Speed MWIR Science-Grade Camera
FLIR X6980™
The FLIR X6980 is an extraordinarily fast midwave IR camera designed for scientists and engineers who need to capture high-speed imagery for accurate thermal analysis and custom radiometric measurements. This thermal imaging camera combines 640 × 512 resolution with blazing-fast frame rates, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X6980 will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.
-
product
Thermal imagers
Thermal imagers sensitive in MWIR and LWIR spectral bands are one of crucial surveillance technologies for defense/security sector. These imagers have also found mass applications outside defense sector. Testing thermal imagers is needed for both manufacturers, maintenance workshops and final users for a set of different and important reasons. Hi-tech test equipment can help significantly in manufacturing, maintenance, training, purchase optimization, and optimal use of these expensive imagers.
-
product
Ultra High Performance Multi-Sensor Camera System
FLIR M500
The gyro-stabilized FLIR M500 cooled thermal camera is our most technologically-advanced M-Series pan and tilt camera ever. Designed around a cryogenically-cooled 640 x 512 pixel Mid Wave Infrared (MWIR) thermal sensor, the FLIR M500 excels at both short and ultra-long range target detection and identification. It features a 14X continuous optical thermal zoom, a color HD camera with 30x zoom, an LED spot-beam, video tracking and radar integration.
-
product
Single LRU HD EO/IR Imaging System
Star SAFIRE® 380-HD
The Star SAFIRE® 380-HD provides superior image stabilization, ultra-long range imaging performance, and true metadata embedded in the digital video. Featuring internal navigation for precise targeting, a MWIR thermal imager, optional HD color and low-light cameras, and multiple laser payload options, the system is fully hardened for military fixed-wing and helicopter operations. It can operate continuously in all conditions — even while sitting on the tarmac with no airflow.
-
product
Discrete Detectors
TRAL test station is a quasi-universal test station designed to measure parameters of discrete (or small linear array) infrared detectors sensitive in a wide spectral range from about 700nm to about 16 000 nm (NIR/SWIR/MWIR/ LWIR detectors or broadband non selective detectors). All main types of infrared detectors can be tested: photonic detectors: photovoltaic/photoreconductive, cooled/non-coooled, thermal detectors, pyroelectric detectors etc.
-
product
High Speed, Performance MWIR InSb Camera
FLIR X6800sc MWIR
The FLIR X6800sc is a fast, highly sensitive MWIR camera designed for scientists, researchers, and engineers. With advanced triggering and on-camera RAM/SSD recording, this camera offers the functionality to stop motion on high- speed events both in the lab and at the test range. The X6800sc has a cooled FLIR indium antimonide (InSb) detector and captures full 640 × 512 images at 520 frames per second, or up to 23,077 Hz with windowing.
-
product
Cameras
Excelitas offers the broadest portfolio of scientific, industrial and specialized imaging camera systems on the market. Equipped with CCD, iCCD, CMOS, sCMOS or InGaAs sensors, our PCO imaging cameras have helped customers achieve successful and reliable measurements over three decades. We also design and manufacture a range of medium and long range thermal cameras covering the MWIR and LWIR wavebands which leverage our proven pedigree in designing and manufacturing high performance optical modules and cameras for demanding surveillance, targeting, naval and C-UAS applications.
-
product
Thermal Cameras
Excelitas designs and manufactures a range of medium and long range thermal cameras covering the MWIR and LWIR wavebands. All cameras utilize the latest sensor technologies and benefit from our proven pedigree in designing and manufacturing high performance optical modules and cameras for demanding surveillance, targeting, naval and C-UAS applications.
-
product
LWIR Cameras
Sierra Olympia Technologies Inc.
Long wave infrared cameras (LWIR) provide the benefit of round-the-clock imaging while maintaining a low size, weight, power, and cost (SWAP-C) as compared to MWIR imagers. These cameras excel as all-around day/night security cameras, at ambient temperature thermography, and outdoor surveillance applications. With a wide variety of uses and applications, Sierra Olympic has LWIR options to fit your needs and budget.
-
product
Pyroelectric Detectors
Pyroelectric detectors are thermal detectors; i.e. they create an electric signal due to temperature changes in the chip. This temperature change is caused by absorption of light. We do use LiTaO3 and DLaTGS as pyroelectric materials. Basically such detectors cover the whole spectra. However, they are mainly used for mid-wave and long-wave infrared detection (MWIR and LWIR). In addition, the usage in the THz region seems to become more popular these days.
-
product
Compact Short Range HD Multi-spectral Surveillance System
TacFLIR® 230
The TacFLIR® 230 provides maximum sensor range performance including a high-resolution color zoom TV camera with low light capability, a powerful 640x480 cooled MWIR thermal camera with 18x total magnification, and optional laser pointer and rangefinder. At 41 pounds and with a nine-inch diameter, the TacFLIR 230 provides the ability to deploy on any platform including UGVs
-
product
Science-Grade MWIR InSb Camera
FLIR A6700 MWIR
Designed for electronics inspections, manufacturing monitoring, scientific research, and non-destructive testing, the FLIR A6700 MWIR camera is ideal for high-speed thermal events and fast-moving targets. Short exposure times allow users to freeze motion and achieve accurate temperature measurements. In fact, the camera’s image output can be windowed to increase frame rates to 480 frames per second to accurately characterize even higher speed thermal events, helping ensure critical data doesn’t get missed during testing.
-
product
SWaP+C Optimized HOT FPA MWIR Camera Module
Neutrino® SWaP Series
The VGA-resolution Neutrino LC and newly-released SXGA-resolution Neutrino SX8 provide best-in-class MWIR imagery and data in a small, lightweight package. Based on Teledyne FLIR’s High Operating Temperature (HOT) FPA technology and linear micro-cooler, SWaP series OEM camera modules are designed for ruggedized products requiring long life, low-power consumption, and quiet, low-vibration operation. Both are ideal for small gimbals and airframes, handheld devices, security cameras, targeting devices, and asset monitoring applications.
-
product
Testing System
OpTest™ MTF
The Optikos OpTest™ MTF Testing Equipment is the most flexible and complete system for characterizing the optical performance of optical elements, lens assemblies and optical imaging systems in Infinite Conjugate, Finite Conjugate and Afocal configurations spanning the UV, Visible, NIR, SWIR, MWIR and LWIR spectral regions . OpTest™ software drives Optikos hardware, is easy to use and controls all motion control, image acquisition, configuration set-up and data reporting.
-
product
Three Micron Optical Spectrum Analyzer 1500 - 3400 Nm
AQ6376E
The AQ6376E is the latest version of our bench-top optical spectrum analyzer extending the wavelength coverage well beyond the NIR range of our previous models into the MWIR region from 1500 to 3400 nm.
-
product
Midwave Infrared Thermal Camera
FLIR A6780 MWIR
The FLIR A6780 MWIR camera system makes it easy to measure temperatures of rapid thermal events and fast-moving targets, making it an ideal choice for industrial, military, and manufacturing R&D applications. This affordable, cooled InSb camera offers the flexibility of both manual and remote-focus lens options to maximize the number of measurement pixels on the object of interest. And single cable connectivity using Gigabit Ethernet provides complete camera control plus data capturing in FLIR Research Studio software – so users can analyze and understand data faster than ever before.
