Product

Arduino CAN Shield

IFB-10003-IWP

-

Playing With Fusion Inc

IFB-10003-IWP - Playing With Fusion Inc

CAN (Controller Area Network) communication has become ubiquitous in industry. It is used in automotive applications (part of OBD and many other datalinks), on-highway trucks (J1939), industrial machinery and instrumentation, and equipment applications (factory automation). This shield is designed to provide a CAN 2.0 front-end interface for 5V Arduino modules (Uno, Mega, etc). The module uses SPI to communicate to the Arduino, and requires an aditional chip select pin. An optional interrupt line to the MCP2515 and two LEDS are also provided. The chip select and interupt lines are selected via zero ohm resistors and have several configuration options for flexibility stacking additional shields. A set of stackable headers is included with this board, not installed. An optional on-board voltage regulator may be used to supply 7.5V to the Arduino's 'Vin' pin (which is regulated to 5V by the Arduino's on-board LDO). The CAN shield regulator supports a wide input range of 9V to 32V. This makes it possible to cleanly build a stand-alone CAN node (remote sensor) without the need for a separate Arduino power supply!

Product

Test Box

RF

-

Broadcast Equipment Ltd

RF - Broadcast Equipment Ltd

This is a custom made part of a Phase Noise test system. It contains relays, filters, amplifiers, and so on. It works with other of-the-shelf eqipment, and custom software to form a high volume production test system. 

Product

RF Shielded Test Enclosure, Slim rack mountable

JRE 1724A

-

JRE Test, LLC

JRE 1724A - JRE Test, LLC

Designed for testing devices with a flat form factor that need plenty of I/O, the rack-mountable JRE1724A is ideal. Similar to our JRE1724, but not as high, you can place multiple devices within its large footprint. Dual I/O panels allow for a multitude of connectors and interfaces. The JRE1724A comes standard with dual honeycomb style vents - pictured is the enclosure with optional cooling fan and USB2.0 interface.

Product

802.11a,b,g Dual RF Shielded Test Enclosure

JRE 0814-2R-A

-

JRE Test, LLC

JRE 0814-2R-A - JRE Test, LLC

Containing all the capability of the larger JRE enclosures, the rack mounted 0814-2R-A is ideal for testing IEEE 802.11 a,b,g devices such as; WLAN, VoIP, access points and other RF devices. Two independent 0814 series enclosures are mounted in one 19 inch rack. Two shielded vents provide excellent cooling and optional fan(s) are available for those hot products. Tough 'honeycomb' vents maintain shielding effectiveness throughout the frequency range. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness.

Product

Breakout Box

FV-EXT

-

Fiber Vision

FV-EXT - Fiber Vision

The handy FiberVision devices FV-EXT1 and FV-EXT2 are designed for the easy integration of FiberVision and Vision Component (VC) smart cameras into your production environment.Central interface for all supply- and communication-cables (switch board)Remote control for all VC based smart cameras such as Caminax or PictorTest of digital camera I/Os and the production environment

Product

19" Rackmount Drawer with Keylock, Shielded, 7"H x 20"D

DR-071920-K

-

ELMA Electronic, Inc.

DR-071920-K - ELMA Electronic, Inc.

Unshielded drawers are constructed of 20 ga. CRS and are furnished with ball bearing chassis slides to provide smooth operation. Available for 19" and 24" rackmount in 20", 24" and 30" depths, with or without a keylock

Product

OBD-II Breakout Box

PPECB

-

Power Probe Group, Inc.

PPECB - Power Probe Group, Inc.

The Power Probe OBD-II Breakout Box is a CAN Bus circuit tester compatible with 12 and 24 Volt systems. The tool connects directly into the Vehicle’s Data Link Connector (DLC) testing for any abnormalities such as shorting and reverse polarity at the pins. If shorting or reverse polarity is present, connecting the PPECB first will prevent harm before connecting a Diagnostic Scan Tool. The Breakout Box provides a live display of present communicating signals without having to use a Digital Multimeter. Additionally, you can quickly test the voltages at all 16 pins.

Product

RF Shielded Test Enclosure, Largest Rack Mountable Enclosure

JRE 1724

-

JRE Test, LLC

JRE 1724 - JRE Test, LLC

Originally designed for testing wide screen laptops, the rack-mountable JRE1724 is ideal for large wireless devices such as; Mesh Network AP's, Cellular/LTE/4G Base Stations, and other large RF devices. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness. Long life door gasket material along with double edge engagement not only provides solid RF shielding, but smooth trouble free operation over its lifespan. Internal struts keep the lid open for easy internal access when connecting the device under test.

Product

Ground Resistance Inspection Box

-

AllWin Instrument Science and Technology Co., Ltd.

AllWin Instrument Science and Technology Co., Ltd.

Check the ground resistance tester each time prior to start work everyday morning and do some relevant records.

Product

MAX31856 Thermocouple Sensor Arduino Shield

SEN-30007-ST

-

Playing With Fusion Inc

SEN-30007-ST - Playing With Fusion Inc

Quad channel thermocouple Arduino shield based on the MAX31856 universal digital thermocouple interface IC. This is an exciting update of the MAX31855, with improvements in resolution (19 vs 14 bits), on-board temperature reference (6 vs 4 bits), and compensation (fully compensated vs nonlinear correction required). The MAX31856 is interfaced via 4-wire SPI with options for interrupt triggering. An LDO and a high-speed level shifter are included on ALL device pins to allow interfacing with to any Arduino - both 3.3V and 5.0V variants - without sacrificing device performance in any operating condition.

Product

Shield Level / Pathloss Equipment

PAMS & PAMS-C

-

Praxsym

PAMS & PAMS-C - Praxsym

PAMS is a user-friendly, transmitter and receiver system that measures shielding effectiveness in RF shielded enclosures.   Lightweight and compact, each PAMS unit measures approximately 12” x 5” x 5” and weighs 5.5 lbs., making PAMS ideally suited to field measurement tasks.  Rugged construction insures instrument survivability in a field test environment. PAMS-C is a simple and efficient solution for quickly identifying shielding faults in an RF shielded enclosure.  Cousin to the original PAMS used extensively by customers operating RF Shielded Enclosures, PAMS-C gives commercial end-users everything needed to measure shielding effectiveness levels of critical infrastructure - all with minimal or no interruption to normal operations.

Product

Launch Box & Pulse Suppressor

OTDR Sidekick

-

M2 Optics, Inc.

OTDR Sidekick - M2 Optics, Inc.

Intended to eliminate the "dead zone" at the beginning of a fiber cable when using an OTDR, The Sidekick from M2 Optics is a compact, durable solution for both field and laboratory use.  Commonly referred to as a launch box, pulse suppressor, or launch cable, this durable test box is also used as a fiber optic delay line and for a variety of other short-distance testing and training applications.

Product

New Generation Vacuum Box for the 3070 Test Platform

Vortex Series

-

Circuit Check, Inc.

Vortex Series - Circuit Check, Inc.

The Vortex Series is a new generation vacuum box for the 3070 test platform that will easily revolutionize in-circuit test. The simplified and streamlined design allows for maximizing the usable testable board size of the Vortex 100 Performance Grade fixture. The rugged all aluminum design maximizes the opening angle of 85° ideal for Cobot usage, while eliminating the top plate and associated hardware and retaining our classic quick plate guided probe technology.

Product

Decade Box, Calibrated, Capacitance, 5, 100pF to 11111µF, 5 %

72-7265 CAL

-

Tenma

72-7265 CAL - Tenma

The 72-7265 CAL from Tenma is a capacitance decade box. It is ideal for service, prototype and experimental use. This useful tool may be set at any non polarized capacitor value from 100pF to 11,111µF in 100pF increments. The decade accuracy is ±5% capacitors used throughout at <1μF, 1KHz test frequency, ≥1μF, 100Hz test frequency. It has weight of 304g/0.69lb and dimension is 14.7cm × 11.7cm × 5.5cm (5.79" × 4.61" × 2.16"). It is typically used in general applications, troubleshooting, maintenance, education and vocational training, production line testing, radio and TV services, working standards, research design & develop, physics laboratory work.

Product

RF Shielded Test Enclosure, Low Profile

JRE 1618

-

JRE Test, LLC

JRE 1618 - JRE Test, LLC

Like its other brothers in the JRE test line, it features rugged welded aluminum construction with superb RF shielding effectiveness. Long life door gasket material along with double edge engagement not only provides solid RF shielding, but smooth trouble-free operation over its lifespan.

Product

Shielded and Unshielded Cable

-

Teledyne Marine Cable Solutions

Teledyne Marine Cable Solutions

​Shielding Types• Braided I Served I Spiral• Foil & Hybrid• Vapor Barriers• Copper & Alloys• Conductive & Static Dissipative Tapes• Conductive Fabrics• Tensile Members• RFI & EMI Tapes & Braids (Serveor Interwoven)• Utilizing Flat & Round Copper• Stainless Steel• Bronze• Aramid Fibers & Textile, amongothers​Construction• Multi-conductor, shielded pairs, pairs with steel tubed fiber or copper conductors with fiber optics, coaxial conductors & aramid strength fibers

Product

IEC60529 IPX1/2 Vertically Drip Box

CX-IPX1/2

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-IPX1/2 - Shenzhen Chuangxin Instruments Co., Ltd.

IEC60529 IPX1/2 Vertically Drip Box

Product

Resistance Decade Box

HARS Series

-

IET Labs

HARS Series - IET Labs

The HARS Series is the best choice when you need a laboratory grade, tight tolerance, high performance resistance decade box that is also cost effective.

Product

Compact Box PCs And Digital Signage Players

-

ADLINK Technology Inc.

ADLINK Technology Inc.

ADLINK industrial box PCs and digital signage players are designed to meet the diverse needs of industries such as retail, transportation, and manufacturing. These compact edge computing solutions ensure reliable performance for real-time data processing and seamless vivid content delivery. Featuring industrial-grade durability, flexible I/O configurations, and scalable options, the EMP Series helps businesses optimize operations, enhance customer engagement, and drive digital transformation in demanding environments.

Product

RF Shielded Test Enclosure, Large interior for multiple device

JRE 1812

-

JRE Test, LLC

JRE 1812 - JRE Test, LLC

Developed expressly for high volume testing of larger RF devices, the 1812 is roomy enough for holding both TX and RX devices for actual on-air tests. Top loading keeps door swing out of the way on congested benchtops. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness.