PCB Inspection
The check and evaulation of Printed Circuit Boards.
See Also: Visual Inspection, Bed of Nails, Flying Probes, AOI, Burn-In, Automated Optical Inspection
-
product
Automated X-ray Inspection (AXI)
Automated X-ray inspection (AXI) is a testing approach based on the same principles as automated optical inspection (AOI). Instead of cameras, X-rays are used to automatically inspect features.
-
product
Testing, Inspecting & Cleaning Kit
KI-TK033
850/1300 nm source & power meter, inspection microscope, cleaning materials. Interchangeable MPO, SC, LC connectors
-
product
Automated And Manual Sample Inspection
In addition to typical in-process, continuous dynamic measurement applications, LaserLinc’s non-contact measurement equipment is well suited for manual and automated off-line sample inspection. Inspecting cylindrical products with long, thin characteristics, such as camshafts and catheters requires checking multiple locations and dimensions for accuracy. Manual inspections of these areas can be difficult because of the complex profile as well as the need for numerous measurement stations, different equipment and skilled personnel.
-
product
Sound Level Meter for Automotive – Car Noise Emission Inspection
HD2010MCTC
The level of noise produced by vehicles shall comply with standards prescribed by international regulations. During car inspections, horns and exhaust devices must be in good condition and comply with the requirements.
-
product
Test System for Detecting Exact PCB Short Circuit Locations
QT25
Qmax Test Technologies Pvt. Ltd.
QT25 employs a unique method to detect exact PCB shorts circuit locations and pin down the shorted components and tracks. It is designed in such a manner that it precisely detects exact short circuit locations across VCC - GND or a shorted component connected across a Bus or hair-line shorts between PCB tracks, Which is highly impossible to detect using conventional tools especially when they are connected parallel in circuit. It can also be used in measuring the contact resistance of switches and relays in its milli-ohm mode as a value add.
-
product
Pull-Thru Adapter, PCB, QuadraPaddle, to 96 Pin FML DIN, f/ NI PXIe-4322
510140250
Pull-Thru Adapter, PCB, QuadraPaddle, to 96 Pin FML DIN, f/ NI PXIe-4322.
-
product
PXI Pull-Thru Adapter, PCB, QuadraPaddle, 68-Pin Male VHDCI
510140125-1
PXI Pull-Thru Adapter, PCB, QuadraPaddle, 68-Pin Male VHDCI
-
product
TO-CAN Package Inspection System
7925
Chroma 7925 is an automatic inspection system for TO-CAN package. The appearance defects over 30 um like lens scratch, partial are clearly conspicuous by using advanced illumination technology. Because the height variation of tray and package exists, Chroma 7925 can calculate the focus distance and compensate to overcome the variation with auto focus function.
-
product
Entry Level GPR System for Concrete Inspection
StructureScan Mini LT
Geophysical Survey Systems, Inc.
The StructureScan™ Mini is GSSI’s all-in-one GPR system for concrete inspection. This handheld system locates rebar, conduits, post-tension cables, voids and can be used to determine concrete slab thickness in real-time.
-
product
Backplane Profiling & Inspection System
603d
A major problem in the backplane industry is detecting bent connector pin defects. The most difficult being when the pin bends underneath the shroud rather than going into the hole. Many times this defect cannot be detected electrically as the connector pin is touching the conductive annular ring of the hole, allowing electrical test to pass. Unfortunately, it is an intermittent connection and will fail later on as there is not an actual mechanical connection.
-
product
PCB Adapter, ITA, QuadraPaddle, 192 Position, to PCB-Mounted 2x68 Pin Female SCSI Connector
510109339
PCB Adapter, ITA, QuadraPaddle, 192 Position, to PCB-Mounted 2x68 Pin Female SCSI Connector.
-
-
product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type I, Ø1.26mm, 230gf
K100-I126230-SKAU
K100 Series, Pitch 100mil, Tip Style I, Tip Diameter Ø1.26mm, Spring force 230gf, Steel with Gold Plating.
-
product
RFID Label Inspection System
Eurotech RFID FS
The Eurotech RFID FS RFID accurately rewinds rolls of RFID labels and validates their receptivity by running them through the Voyantic Tagsurance RFID inspection system. The unit allows stopping at a predetermined editing spot for the removal and replacement of the defective piece, as well as indicating defective labels by a mark printed by an inkjet system integrated with the machine. Adjustment of the closed loop tension control system can be made through adjusting the parameters on the software that control the servo motor control system. This gives the customer a virtual infinite range with which to wind their labels without cracking the inlay or antenna. As well accurate web adjustment and guidance is provided with a web guide system complete with an ultrasonic sensor. The Eurotech RFID FS RFID label inspection system is equipped with the Voyantic Tagsurance for testing the performance of RFID tags. This is done by verifying that the tag responds to commands on its whole operational frequency range, which means testing the tag on multiple frequencies, also outside the RFID reader frequency. Accurate power output combined with the Voyantic Snoop Pro antenna, optimized for testing tags inline at high speed, allows defining precise acceptance criteria and achieving stable quality.
-
product
Cable Assembly, Receiver, QuadraPaddle & Mini Coax, 36", PCB Adapter
540103010258
This cable assembly comes with PCB adapter 510150210 and a Mini Coax module to 4 SMB plugs.
-
product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type E, Ø1.50mm, 230gf
K100-E150230-SKAU
K100 Series, Pitch 100mil, Tip Style E, Tip Diameter Ø1.50mm, Spring force 230gf, Steel with Gold Plating.
-
product
Fiber Optic Inspection & Cleaning
One of the most basic and important procedures for the maintenance of fiber optic systems is to clean the fiber optic equipment.
-
product
PXI Pull-Thru Adapter, PCB, QuadraPaddle, 68-Pin Male VHDCI
510140125-2
PXI Pull-Thru Adapter, PCB, QuadraPaddle, 68-Pin Male VHDCI
-
product
50-Pin D-Conn Male Straight PCB, HV
40-963-050-SM-HV
Ideal for user created termination schemes where the termination is to be on the front or remotely connected to the module by cable. Suitable cables for this product are detailed in the data sheet. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires.
-
product
9-Pin D-Type, Female, Straight PCB Mount
40-963-009-SF
Accessory allows a user to create their own PCB based termination solution mounted directly on the front of the product or on the end of a cable. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires.
-
product
9-Pin D-Type, Right Angled PCB, Male,HV
40-963-009-RM-HV
9-Pin Male Right Angled D-Type Connector, High Voltage - PCB Mount
-
product
20-Pin Scorpion Female Connector, 30A, Straight PCB Mount
C020AFX-2PS-3A
This is a female 20-pin Scorpion Connector, straight, suitable for PCB mounting. The connector is keyed to position 2 and it has a maximum current handling of 30A and is suited for direct connection to Pickering Interfaces products.
-
product
Circuit Simulation & PCB Design Software
TINA Design Suite
TINA Design Suite s a powerful yet affordable circuit simulation and PCB design software package for analyzing, designing, and real time testing of analog, digital, HDL, MCU, and mixed electronic circuits and their PCB layouts. You can also analyze SMPS, RF, communication, and optoelectronic circuits; generate and debug MCU code using the integrated flowchart tool; and test microcontroller applications in a mixed circuit environment.
-
product
Automated Optical Inspection (AOI)
Automated optical inspection (AOI) is an automated visual inspection of printed circuit board (PCB) (or LCD, transistor) manufacture where a camera autonomously scans the device under test for both catastrophic failure (e.g. missing component) and quality defects (e.g. fillet size or shape or component skew). It is commonly used in the manufacturing process because it is a non-contact test method.
-
product
Installation of Visual Inspection of the Inner Surface of Hollow Cylindrical Parts
Create an installation that allows visual inspection of the inner surface of hollow cylindrical parts with the ability to display the resulting image on a personal computer monitor with its subsequent saving in the JPEG format.
-
product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type K, Ø1.50mm, 305gf
K100-K150305-SKAU
K100 Series, Pitch 100mil, Tip Style K, Tip Diameter Ø1.50mm, Spring force 305gf, Steel with Gold Plating.
-
product
PCB IMIC01, 100 mV/g, 2-Pin, Accelerometer, Industrial Vibration Sensor
780985-01
The PCB IMIC01 is an industrial Vibration Sensor designed for permanent installations. This sensor helps you acquire sound and movement data with supported PXI Sound and Vibration Modules, C Series Sound and Vibration Input Modules, and USB-based Sound and Vibration Devices. The PCB IMIC01 features a sensitivity range of 100 mV/g and uses the Integrated Electronics Piezo-Electric (IEPE) current excitation. The sensor supports the IMI Industrial Accelerometer Cable as well as the MIL2M-Breakout Cable.
-
product
Complete GPR System for Road Inspection
RoadScan
Geophysical Survey Systems, Inc.
The RoadScan™ 30 system provides users with an effective tool for quickly determining pavement layers at high speeds. RoadScan is able to collect data densities not obtainable using other labor-intensive methods commonly used for pavement testing.
-
product
Test Systems Inspection Systems
Different requirements demand flexibility. ELABO boasts a modular product portfolio permitting the economical creation of bespoke solutions for every client. These solutions range from individual testing devices through tabletop workstations with integrated testing equipment all the way to automated systems with ERP connections for mass production.
-
product
Robotic 2D & 3D Vision Inspection
EyeT+Inspect
EyeT+Inspect is the outstanding 3D device for robotic visual inspection combining robust 3D vision to inspect product shape with fast 2D vision to inspect product surface. EyeT+Inspect optimizes production thanks to automatic and objective removal of defective products from the production line.
