ATX Hardware GmbH
ATX is Europe's market leader in the manufacture of test adapters for electronic testing procedures. As a specialized solutions provider, we design and produce customized products using semi-automated single-unit and small-batch production. Most of our devices are precision-engineered, one-of-a-kind pieces of varying complexity. Customers use our products for in-circuit, functional, and final testing of electronic assemblies and printed circuit boards. Our strong innovative capabilities and commitment to quality set us apart from the competition. As a medium-sized company, the ATX Group employs over 190 people at two locations in Upper Bavaria (Pürgen) and Baden-Württemberg (Ehningen).
- +49 81 96 / 93 04 - 0
- +49 8196 9304-0
- info@atx-hardware.de
- Am Wiesengrund 12
Purgen, 86932
Germany
-
Product
Adapter Interface 0-15 Slot
101150
-
Interface 33 Slot | 128 Pin CardSlot | Pin countGenrad 8x 128 PinInterface 0-15 Slot | 1536 D/SNo. E07-00133
-
Product
Protective Strip Angle
E01-00086 | E01-00087
-
Protective strip angle: ref. no. E01-00086 | E01-00087
-
Product
MMIWK-C
-
The interchangeable cassettes in our renowned Premium MMI series are available in two versions: 1. Mounted: Our assembled interchangeable cassettes provide you with a fully assembled version that is ready for immediate use. 2. Self-assembly kit (unassembled): With our self-assembly kit, you can organise your own extension projects even more flexibly and efficiently. Our self-assembly kit provides you with everything you need to assemble the cassettes quickly and easily. Both our cassette self-assembly kits and our standard assembled cassettes consist of a hold-down plate, board carrier plate and pin carrier plate, a handle and a cassette including interface preparation.
-
Product
ATX Coaxial Probe V2.0 Long
-
THE NEW UNIVERSAL PROBE FOR CAPACITIVE MEASUREMENTS ON ICT TEST SYSTEMS. The ATX Coaxial Probe V2.0 has been developed to offer you a significantly more stable and reliable probe. Thanks to the improved mechanical stability of the probe, you can significantly increase the reliability and robustness of your production processes. Our probes are secured against twisting and have an individually adjustable height suspension. Each probe consists of the following two main components: Basic unit: The ATX Coaxial Probe V2.0 is available in two different lengths (37mm and 64mm), allowing flexible height compensation and precise alignment of the probe. Probe plate: Available in three different sizes (25x25mm, 45x45mm and 16x80mm). It is also possible to customise the probe plates to your respective component dimensions. Our probes can be extended and universally customised to include the following components for specific test systems: Muxboard: Available for Keysight NanoVTEP and Teradyne Framescan FX2. Amplifier: For Keysight NanoVTEP, Teradyne Framescan FX2, Digitaltest OpensCheck and SPEA Escan.
-
Product
Catch Pins Single
-
Catch pins are responsible for the correct guidance of the assembly to the needle bed. The so-called guide-drilled holes in the PCB contract with the installed catch pins.
-
-
Product
Hold-Down / GRP
-
GRP hold-downs are responsible for holding the assembly down constantly when closing the bonnet so that no resistance is created and the assembly is guided evenly to the needles.
-
Product
MMI-DVI, Fixtures with Higher Voltages
100290
-
The MMI-DVI is a good basis for fixtures with higher voltages. The MMI-DVI is made of NON-dissipative plate material and can therefore be used in the low-voltage range (up to 1000V AC / 1500V DC). The earthing package included is an important component. This is because the housing earthing, the earthing connection and the earthing test ensure that the safety standards are met. The solenoid interlock and the safety switch ensure access protection.
-
Product
Hold-Down
-
Hold-downs are responsible for holding the assembly down constantly when closing the bonnet so that no resistance is created and it is guided evenly to the needles.
-
Product
Starter Package For MMI Series
109762
-
Optionally, you can also order the corresponding starter package with your fixture kit. This includes our standard hold-downs, as well as our LP supports and insertion aids. Content- 20x Hold Down 50mm 433108- 20x LP editions 439003- 4 x insertion aid stainless steel 335012
-
Product
Guide Bolt "clip"
-
Guide bolt for LOXX top part. The guide bolts are used for precise guidance between the board support plate and the hold-down plate. The "clip" version is an optimised guide bolt that can be attached quite easily with a "CLICK".
-
Product
MEPWG-A, Exchangeable System
-
As an attractive alternative, we can also offer you this model as a product variant MEPWG-A with pneumatic changing system. The cost-effective cassette solution is suitable for many changing products and saves you a lot of time during product changeover thanks to tool-free changing.
-
Product
LED Life Analyser
-
In order to better test the service life of LEDs, Feasa developed the LED Life Analyser, which enables LED values to be measured under extreme temperatures. This model can measure at temperatures from -65 °C to +125 °C. The fibres used in the Life Analyser are specially designed for use at extreme temperatures. To support this, specific optical heads made of selected materials were designed to withstand the high temperatures. The Feasa Life Analyser is available in 3, 5, 10 and 20 channel configurations. The interfaces are USB, RS232 and daisy chain. The associated test software continuously tests the LEDs at fixed time intervals and saves the results to the hard drive. The software can also send updates via e-mail.
-
Product
Feasa Legend
-
The Feasa Legend is an innovative solution with numerous advantages for applications with a large number of LEDs. The Feasa Legend system comprises two components, a hub and an LED analyser. The hub can be mounted on a test station or in the test fixture. The Legend can control up to eight LED analysers. Each LED analyser can test up to 20 LEDs and a fully equipped hub can test up to 160 LEDs. Several hubs can also be combined for a larger number of LEDs.The Feasa Legend is available in 60, 80, 100, 120, 140 and 160 channel configurations.The Legend Hub measures 130 mm x 55 mm x 30 mm - the Legend Analyser, on the other hand, measures 120 mm x 29 mm x 50 mm.Each channel has a fibre length of 0.6 m, whereby the fibre has a diameter of 1.00 mm including cladding and a bending radius of 15 mm. The analyser is designed for a wavelength range of 450 nm to 650 nm and a temperature range of 0 °C to +50 °C.
-
