ATX Hardware GmbH
ATX is Europe's market leader in the manufacture of test adapters for electronic testing procedures. As a specialized solutions provider, we design and produce customized products using semi-automated single-unit and small-batch production. Most of our devices are precision-engineered, one-of-a-kind pieces of varying complexity. Customers use our products for in-circuit, functional, and final testing of electronic assemblies and printed circuit boards. Our strong innovative capabilities and commitment to quality set us apart from the competition. As a medium-sized company, the ATX Group employs over 190 people at two locations in Upper Bavaria (Pürgen) and Baden-Württemberg (Ehningen).
- +49 81 96 / 93 04 - 0
- +49 8196 9304-0
- info@atx-hardware.de
- Am Wiesengrund 12
Purgen, 86932
Germany
-
Product
Boardmarker BMP1
549001
-
The so-called PCB markers (BMP-1 board markers) are used to mark assembled and unassembled PCBs as good. These are integrated into our adapters and draw a circle in each PCB that is found to be "good", provided the test device has the appropriate electronics and software.
-
Product
High Speed Block | Adapter Side
585128
-
VGFCB-76D High-Speed Date Block adapter side- 1x HDMI connection- 1x USB 2.0 connection- 1x RJ45 connection- Screw hole diameter 2.8mm
-
Product
Functional Analyser (FKT)
-
The Feasa Functional Analyser (FKT) is available in 3, 5, 10 and 20 channel configurations. The interfaces for this are USB, RS232 or daisy chain - several LED analysers can be connected to each other via the daisy chain connections. Only one serial RS232 port is required to connect up to 30 LED analysers. The devices with 3, 5 and 10 channels measure 86 mm x 57 mm x 50 mm - the model with 20 channels, on the other hand, measures 127 mm x 57 mm x 55 mm. Each channel has a fibre length of 0.6 m, whereby the fibre has a diameter of 1.0 mm and allows a bending radius of 15 mm. The analyser is designed for a wavelength range of 450 nm to 650 nm and a temperature range of 0 °C to +50 °C.
-
Product
ME2HF-B
101508
-
The mechanical and pneumatic version of the ME2 series can be easily and simply extended with the ME2HFK high-frequency insert, which also contains the shielded housing (dimensions of lower shielded housing: 212 x 240 mm). This means that both the ME2 and the ME2P with ME2HFK insert can test sensitive and transmitting assemblies - including those with a combination of transmitter and receiver - precisely and reliably without risking any consequences for your production. At the same time, interference with sensitive assemblies can be reliably ruled out. This is because it is particularly important for tests in the high-frequency range to reliably protect your test specimens against interference radiation from the environment.
-
Product
MMI-EV, Mechanical Test Fixture
100232
-
Mechanical test fixture with optimised ergonomics for function tests, end tests and ICT applications. The MMI is prepared for safety switches with guard locking as well as for electrical interlocking. Our MMI-EV test fixture is highly versatile.
-
Product
ME2PHF-B
101512
-
The mechanical and pneumatic version of the ME2 series can be easily and simply extended with the ME2HFK high-frequency insert, which also contains the shielded housing (dimensions of lower shielded housing: 212 x 240 mm). This means that both the ME2 and the ME2P with ME2HFK insert can test sensitive and transmitting assemblies - including those with a combination of transmitter and receiver - precisely and reliably without risking any consequences for your production. At the same time, interference with sensitive assemblies can be reliably ruled out. This is because it is particularly important for tests in the high-frequency range to reliably protect your test specimens against interference radiation from the environment.
-
Product
13-Pin Pneumatic Coax Block
-
13-pin pneumatic coaxial block, receiver side.Pneumatics:- Fitted with KSV-PK-4 (VGRCB-13 tyre)- 6mm hoseCoax:- (VGRCB-13C)- Voltage 250VAC- Current 5A- Contact resistance 39mΩ- Impedance 50Ω- Line resources 3.7Ghz (-3db)- Absorption capacity 8.8pf- Inductance 42mH- Resistance 25,000 cycles- Network connection SMB- Max. Power loss *: 25W
-
Product
In Circuit Test Analyser (ICT)
-
The Feasa In Circuit Analyser (ICT) is available in 3, 5, 10 and 20 channel configurations. Interfaces for this are RS232 or 20-pin port. This model can also be "triggered" by a trigger.The devices with 3, 5 and 10 channels measure 100 mm x 29 mm x 50 mm - the model with 20 channels, on the other hand, measures 140 mm x 29 mm x 50 mm.Each channel has a fibre length of 0.6 m, whereby the fibre has a diameter of 1.0 mm and allows a bending radius of 15 mm.The analyser is designed for a wavelength range of 450 nm to 650 nm and a temperature range of 0 °C to +50 °C.ISSUE: Red, green, blue (RGB), hue, saturation, intensity (HSI), dominant wavelength, CCT, CIE xy, CIE u'v depending on interface.DRIVERS FOR SOFTWARE: Test model for Agilent i3070, test code for Teradyne, DLL for testing, function sequence input Labview, C++.
-
Product
MMI-DVH, Mechanical Test Fixture
100360
-
Mechanical test fixture with optimised ergonomics for function tests, end tests and ICT applications. The MMI is prepared for safety switches with guard locking as well as for electrical interlocking. Our MMI-DVH test fixture is versatile and has a special cover height (internal cover dimension 114.5 mm). Reinforced version!
-
Product
Adapter Interface 0-15 Slot | Test System LH
101433
-
Interface 19 Slot | 256 Pin CardSlot | Pin countGenrad 8x 128 PinInterface 0-15 Slot | 1536 D/S
-
Product
MMIWG2-A
-
Unlike our first MMIWG version, our MMIWG2 series offers you even more ergonomics thanks to our new Top Loader function. After unlocking the cassette, it can be easily removed upwards, whereby it is no longer necessary to open the housing to change the cassette. The simple and time-saving cassette change thus enables you to further reduce set-up times and guarantees even faster further work on the test specimen. This optimisation also reduces the mechanical load on the basic fixture wiring. The MMIWG2-A is prepared for safety switches with guard locking as well as for electrical interlocking.
-
Product
Display Analyser
-
The Feasa Display Analyser is able to test the luminance, colour and contrast ratio of an automotive display. This analyser consists of a measuring head, fibre optic cable and a multi-channel sensor module. The Feasa Display Analyser is available in 3, 6 and 10 channel configurations. The number of channels of a multiple mode can be additionally increased via the daisy chain connection. The test values range from a minimum luminance of 0.01 cd/m² and a maximum luminance of 10,000 cd/m², contrast ratio of 200,000:1, display homogeneity in cd/m² and xy colour value. The temperature range is 0 °C to +40 °C. The devices with 3 and 6 channels measure 86 mm x 57 mm x 55 mm - the model with 10 channels, on the other hand, measures 124 mm x 57 mm x 75 mm. Each channel has a fibre length of 0.6 m, whereby the fibre has a diameter of 5.2 mm and allows a bending radius of 25 mm.
-
Product
39-Pin Signal Block | Receiver Side
-
Receiver pylon block 39-pin signal block / dagger (D). Material: 6mm EGS619. Spring contact - head shape = dagger (GP 541 B). Sleeve aligned with WireWrap/ solder connection. Needle protrusion = 5.2mm. Recommended working stroke: 2.6mm. Grid dimension = 2.54mm. Max. Rated current 1A.
-
-
Product
Compact-V Test Station
Y1801330
-
Interface Seica-PM-Y1801330. Put together the right fixture kit, consisting of housing and kit.
