SENIS
Develops, manufactures and supplies worldwide advanced sensors and instruments for magnetic field measurements and electric current.
- +41 43 205 26 37
- info@senis.swiss
- Neuhofstrasse 5A
Baar (Zug), 6340
Switzerland
-
Product
Magnetic Transducer With Fixed Fully Integrated 1-/ 2-/ 3-Axis Hall Probe
F3B
-
The F3B Magnetic Transducer incorporates a fully integrated 3-axis Hall Probe, elevating the measurement precision required in diverse applications. Designed with a high spatial resolution, this transducer excels in reliably capturing the intricate dynamics of magnetic fields. It features advanced on-chip signal processing technology that delivers a frequency bandwidth ranging from DC to 25 kHz, thus making it suitable for a variety of operational environments including laboratories and production lines. The orthogonality error is less than 1°, enhanced by the integrated CMOS technology that ensures precise fabrication of Hall elements and improved angular accuracy, making this device not just versatile, but also critical in applications demanding high precision, such as 3D magnetic field mapping, the development and characterization of magnet systems, and quality control in electromagnetic devices.With additional features like temperature compensation through an integrated sensor, the F3B is robust against external disturbances, rendering it reliable for real-time measurements. The electronic module provides essential features like signal amplification, offset cancellation, and tunable sensitivity adjustments, all of which further enhance its functionality in demanding scenarios. The F3B transducer thus stands out as a vital tool in advancing the research and industrial standards in magnetic field measurement and control, supporting probes of various types including A, C, K, H, and L, along with sliding Hall probes, showcasing exceptional adaptability and performance.
-
Product
Magnetic Field Transducer With Integrated 1-Axis (By) Hall Probe
I1A
-
The I1A Magnetic Field Transducer with Integrated 1-axis (By) Hall Probe is designed to measure magnetic fields perpendicular to the probe plane with exceptional accuracy and precision. This transducer is renowned for its low noise and minimal offset fluctuations, ensuring reliable measurements in various applications. The small form factor of the integrated Hall element, measuring just 22 μm x 22 μm, yields remarkable spatial resolution, making it ideal for tasks such as magnetic field mapping and characterization of permanent magnets. Coupled with its integrated temperature sensor, this device allows for effective temperature compensation, greatly enhancing measurement consistency.The I1A transducer excels in different magnetic flux density ranges, including ±0.1T, ±0.2T, ±1T, and ±5T, which can accommodate a variety of applications from laboratory research to on-line quality control in production environments. With an output voltage that is high-level differential and proportional to the measured transverse magnetic flux density, it ensures accurate data transfer. The built-in modules for conditioning signals include features for amplification, non-linearity correction, and sensitivity adjustments that compensate for temperature variations, further enhancing its performance in real-world applications.
-
Product
Customized Defectoscopes For Magnet Crack Testing
-
The SENIS Defectoscope Systems for magnet crack testing are advanced quality control inspection tools designed to ensure the reliability and integrity of permanent magnet assemblies. Utilizing innovative eddy-current probes, these defectoscopes accurately detect cracks and inhomogeneities in both magnetized and non-magnetized materials. The combination of inductive sensors and magnetic Hall sensors enables precise inspection for mechanical cracks down to the micrometer scale, making it ideal for rigorous production line settings. The software-integrated system allows for high-speed inspections, automatically sorting out defective parts and marking acceptable ones, thereby enhancing productivity and ensuring the safety of end products.The DEF-1C-IH2 model features a robust electronic box housing essential modules that include high-accuracy magnetic field transducers and inductive sensors tailored for capturing eddy currents effectively. Safety features such as an Emergency Stop switch on the control panel further enhance user experience, ensuring smooth operations while minimizing risks. Designed for ease of use, the system transports parts pneumatically over sensor configurations, streamlining the inspection process. With a thorough understanding of both the mechanical and electronic components involved, the SENIS Defectoscope provides unmatched quality assurance across all magnet handling tasks.
-
Product
Teslameter / Gaussmeter For Industrial Application
3MH3
-
The 3MH3 Teslameter/Gaussmeter is a cutting-edge device designed for precision measurement in industrial applications. It features fully integrated 1-, 2-, and 3-axis Hall Probes that deliver high accuracy magnetic field readings across a wide frequency range, including DC and AC up to 1kHz. With an impressive resolution of 100ppm and an accuracy rating of up to 0.05%, the device ensures reliable performance in various settings, from quality control of permanent magnets to magnetic field mapping and process monitoring in production lines.Equipped with a digital module, the Teslameter not only provides an LCD display for real-time monitoring of magnetic field components (Bx, By, and Bz) but also includes a temperature measurement feature, enhancing the device's functionality for comprehensive data analysis. Additionally, automatic data acquisition is possible through USB and RS232 connections, allowing seamless integration into existing measurement routines with widely used programming tools like LabVIEW, Basic, and C++. Whether used in research labs or industrial environments, this Teslameter is engineered to fulfill diverse measurement needs with unmatched precision and ease.
-
Product
3-Axis Hall Probe L
-
The fully integrated 3-axis Hall Probe of the type LXS is engineered for optimal performance in measuring magnetic fields. With dimensions measuring at just 1.85 x 0.66 x 0.10 mm for the naked silicon chip, it's designed to provide high spatial resolution, making it ideal for applications necessitating close proximity measurements to test subjects. Notably thin, the probe also features an ultra-thin tip of 0.1 mm and a probe body thickness of 0.5 mm, ensuring efficient operation in narrow gaps where traditional probes may struggle.The LXs Hall Probe offers versatile solutions with three distinct lengths: the long version (LLs) at 71 mm, medium (LMs) at 47 mm, and small (LSs) at 8 mm. The device is equipped to output real-time analog voltages for all three magnetic field components (Bx, By, Bz) while simultaneously monitoring the probe's temperature, which is critical for high-precision applications. The advanced CMOS technology embedded within the probe ensures the orthogonality error remains below 1°, resulting in unparalleled measurement accuracy, making the Hall Probe an essential tool for those demanding exactitude in magnetic field analysis.
-
Product
3-Axis Hall Probe A
-
The Hall Probe A for F1A Magnetic Transducers is a highly advanced, robust solution designed for precise measurement in magnetic field applications. With dimensions of 16.5 mm in length, 5.0 mm in width, and a thickness of 2.3 mm, this single-chip, fully integrated 1-axis Hall probe excels in providing accurate readings of magnetic fields perpendicular to the probe plane. Utilizing a CMOS integrated circuit, it incorporates four Hall elements, biasing circuits, amplifiers, and a temperature sensor, which enhances its versatility and reliability in various environments.The Hall Probe features a remarkable spatial resolution of 0.4 x 0.01 x 0.04 mm, thanks to the compact size of the integrated Hall elements. It employs a unique spinning-current technique that effectively suppresses the planar Hall effect, achieving an extensive frequency bandwidth of DC to 75 kHz. This ensures that the output signals are not only stable but also highly responsive, making it an ideal choice for scenarios requiring rigorous magnetic field analysis. Furthermore, the integrated temperature sensor provides compensation, ensuring that performance remains consistent across different thermal conditions. The Hall Probe A is suitable for use as a Y-axis Hall probe and is available separately for OEM customers.
-
Product
Differential-To-Single Ended Signals ADAPTER 3DSA-05 (For 3-Axis) / 1DSA-05 (For 1-Axis)
-
Converts differential signal from the transducer to single ended signal (for use with osciloscopes, data acquisition systems, etc)
-
Product
Compact 3D Magnetic Field Mapper
MMS-2A-ROT
-
The Compact 3D Magnetic Field Mapper MMS-2A-ROT is an advanced system designed specifically for the precise measurement and mapping of cylindrical permanent magnets such as rotors, disks, and rings. Utilizing a 3-axis Hall probe with a sensitivity volume of only 150x150x10 micrometers, it ensures accurate point measurements of magnetic fields with accuracy better than 1% of the measurement range (2 T range: better than 2%). The system supports intuitive Mapper software that enables seamless data acquisition, visualization, and analysis, making it an ideal choice for engineers and researchers requiring high-speed and high-precision measurements in various applications, including production and development environments.With selectable measurement ranges of 100mT, 500mT, and 2T, the MMS-2A-ROT system is adept at capturing both DC and AC magnetic fields at a sampling rate of 30 kSamples/s, allowing for rapid data collection and analysis. The multifunction Data Acquisition Card enhances motor control, further contributing to its fast scanning capability of up to 180 degrees per second. The software offers detailed 3D mapping visualization, enabling comprehensive analysis of multipole magnets and ensuring optimal performance across various setups and operational requirements.
-
Product
Reference Magnets
-
Very stable reference magnets for highly accurate in-situ validation of magnetic field sensors, teslameters and mappers. Three Component Reference Magnet. Magnetic fields available: 100mT. Easy and fast to use. Mechanical referencing and orthogonality of the magnetic field better than 0.1° in all 3-directions.
-
Product
Cryogenic Low Noise Magnetic Field Transducer
K3A
-
The SENIS K3A cryogenic low noise magnetic field transducer is engineered to deliver highly accurate measurements of the amplitude and direction of magnetic fields at extreme cryogenic temperatures, extending down to approximately 1 K. This innovative instrument features a compact sensor head boasting dimensions of just 4.5 x 4.5 x 9 mm, integrating a robust 3-axis Hall sensor that guarantees precision in magnetic field readings. Notably, it incorporates the world’s smallest field-sensitive volume, measuring less than 0.6 mm³, making it a premier choice for applications requiring compact and efficient magnetic field measurements.Equipped with cutting-edge electronics, the K3A transducer provides exceptionally low drift and ultra-high resolution in its measurements. The device outputs an analog voltage for each magnetic field direction (Bx, By, Bz), facilitating accurate assessment of magnetic fields. Optional high precision calibrations are available, achieving an impressive accuracy of 0.25% and accommodating magnetic fields up to ±9 T, even at cryogenic temperatures as low as 4 K. This instrument is ideal for researchers and engineers needing reliable and precise magnetic field measurements in challenging environments.
-
Product
3-Axis Hall Probe K
-
Introducing the 3-axis Hall Probe K, engineered for advanced measurement and high performance in magnetic field detection. This highly integrated Hall probe utilizes a naked Silicon chip mounted on an alumina ceramic substrate, offering exceptional durability and precision. With two thickness options—0.5 mm for ultra-thin applications and 0.75 mm for enhanced robustness—and three length choices (71 mm, 47 mm, and 8 mm), this probe is versatile enough to accommodate a range of environments and requirements in both analog and digital magnetic field transducers.The K series Hall Probe incorporates state-of-the-art CMOS technology, enabling high spatial resolution and accuracy with the capability to measure all three magnetic field components (Bx, By, Bz) simultaneously. The device outputs high-level voltages proportional to the detected magnetic fields and includes a built-in temperature sensor. With an angular accuracy of less than ±1° and frequency bandwidth support from DC to 25 kHz, the probe ensures precise measurements with minimal interference, making it an ideal choice for applications requiring reliable and accurate magnetic field sensing.
-
Product
High-Precision Teslameter With 3-Axis Interchangeable Hall Probes
3MH6-E
-
The 3MH6-E High-Precision Teslameter integrates cutting-edge technology with ease of use for precise magnetic field measurements. It features a C-type 3-axis Hall Probe that allows for the measurement of the magnetic field components (Bx, By, Bz) while also providing temperature readings. With a remarkably low mutual orthogonality of less than 0.1 degrees between the probe's measurement axes, this instrument ensures exceptional accuracy in magnetic field mapping. The Teslameter is designed for versatility, allowing full interchangeability between any 3D Hall probes within the 3MH6-E series, maintaining a DC accuracy of better than 100 parts per million (ppm).
-
Product
MAGNETIC FIELD CAMERA SEN-3D-CAM
SENCAM
-
Introducing the **SENCAM – MAGNETIC FIELD CAMERA SEN-3D-CAM**, the world's first true 3D magnetic field camera designed for unparalleled precision and speed. Engineered with the cutting-edge Senis proprietary 3D Hall technology, this remarkable camera captures all three magnetic field components—Bx, By, and Bz—simultaneously. The compact, lightweight design allows it to easily fit into tight workspaces, making it the ideal choice for applications in magnetic systems development, quality assurance, and production line inspections. With a world-class spatial resolution of 100 µm and a sensitive volume of just 27µm x 9µm x 4µm at each pixel, users can expect highly accurate representations of magnetic fields, even in complex scenarios where field gradients are significant.SENCAM operates at an impressive image acquisition rate of up to 7 images per second, allowing for real-time tracking and analysis of magnetic fields. The camera boasts 16,000 pixels across its imaging surface, solidifying its status as a leader in high-speed magnetic imaging technology. Coupled with USB-C connectivity, data transmission is streamlined for immediate analysis and visualization. Additionally, with the optional Senis 2D Vision Commander Software, users can perform advanced magnetic image analyses, enabling sophisticated interpretation of magnetic data. Whether used in laboratories or industrial settings, the SENCAM is transforming the landscape of magnetic field measurement.
-
Product
Magnetic Transducers With Integrated 2-/ 3-Axis Hall Probe
I3D
-
The I3D Magnetic Transducers with Integrated 3-axis Hall Probe represent a cutting-edge solution for magnetic field measurements, designed for high precision and reliability. This device is capable of measuring all three components of an applied magnetic field (Bx, By, Bz) with exceptional spatial resolution thanks to its integrated CMOS Hall probe. Featuring advanced low-noise and low-offset fluctuation technology, the I3D transducers ensure that measurements are not only accurate but also maintain high linearity and orthogonality accuracy, making them suitable replacements for the older I3C Magnetic Field Transducer model.Built with a robust electronic module that enhances the Hall probe's output, the I3D magnetic field transducers provide differential output voltages proportional to the magnetic flux density and include temperature compensation. The system allows for efficient mapping of magnetic fields, and is ideal for applications such as laboratory measurements, quality control in magnet systems, and current sensing. Users can rely on the I3D for reliable data collection in various demanding environments, bolstered by the device's low noise characteristics and high-resolution capabilities.
-
Product
Calibration Cube / Reference Magnet
-
The SENIS Calibration Cube is an indispensable tool for the precise calibration of magnetic field sensors and mapping equipment. With a homogenous magnetic field accessible through six strategically placed holes in the cube's faces, users can easily place sensors from various sides to calibrate their sensitivity vectors accurately. This makes it an ideal solution for in-situ validation, ensuring reliability and accuracy in the user's environment. The calibration tool not only simplifies the calibration process with its intuitive software guidance, leading to the creation of a sensitivity matrix, but it also defines mechanical referencing with an orthogonality better than 0.1° across all three directions. In addition to its effective calibration capabilities, the SENIS Calibration Cube serves as a stable reference magnet, enhancing the user experience. The cube requires less than 30 minutes for full high-accuracy orthogonality recalibration, making it efficient for routine sensor changes on mappers. The included Calibration Cube Corner Tool further aids in ensuring accurate orientation to external Cartesian coordinate systems, solidifying its role in achieving the highest mechanical accuracy in magnetic sensor applications. Coupled with its dust-free surface for easy cleaning, the SENIS Calibration Cube stands as a reliable and high-performance calibration instrument.
