NI
NI is a technology pioneer and leader in virtual instrumentation - a revolutionary concept that has changed the way engineers and scientists in industry, government, and academia approach measurement and automation.
- +1 877 388 1952
- 11500 N Mopac Expwy
Austin, TX 78759-3504
United States of America
Categories
-
product
PXIe-1486, 8 Input, 8 Output, or 4 Input/4 Output PXI FlexRIO FPD-Link™ Interface Module
787454-01
The PXIe-1486 combines the Texas Instruments Flat Panel Display Link™ (FPD-Link™) interface with the Xilinx FPGA for high-throughput vision and imaging applications. This module provides a high-speed digital interface for using and testing modern advanced driver assistance systems (ADAS) and autonomous drive (AD) camera sensors and electronic control units (ECUs). Additionally, the PXIe-1486 makes use of a combination of FPD-Link™ serializers and deserializers with a Xilinx FPGA to provide a high-throughput and customizable FPD-Link™ interface on PXI. The included FlexRIO driver, with LabVIEW FPGA examples, provides access and control for power-over-coax, I²C back-channel communication, and general-purpose input/output (GPIO) communication on the FPD-Link™ channels. The PXIe-1486 is ideal for applications such as in-vehicle data logging, lab-based playback, or hardware-in-the-loop (HIL). FPD-Link is a trademark of Texas Instruments.
-
product
PCIe-6738, 16-Bit, 32 Channels, 1 MS/s Analog Output Device
785822-01
The PCIe-6738 is a high-speed, high-density analog output device designed to deliver simultaneous, multichannel updates for control and waveform output applications such as stimulus-response tests, including acoustic distortion testing, and simulation such as three-phase power simulation. In addition, the device provides eight 5 V TTL/CMOS digital I/O lines; two 24-bit, 20 MHz counter/timers; and digital triggering and external clocking capabilities. The PCIe-6738 can replace several kinds of instruments, including stand-alone proportional integral derivative (PID) controllers, low-speed arbitrary waveform generators, and function generators. You can control each data point for each channel to define common waveforms, such as square, sine, or sawtooth, as well as complex waveforms.
-
product
PXI-6284, 32 AI (18-Bit, 625 kS/s), 48 DIO, PXI Hybrid, Multifunction I/O Module
779122-01
32 AI (18-Bit, 625 kS/s), 48 DIO, PXI Multifunction I/O Module—The PXI‑6284 offers analog input, correlated digital I/O, two 32‑bit counter/timers, and analog and digital triggering. The device delivers low-cost, reliable DAQ capabilities in a wide range of applications from simple applications in laboratory automation, research, design verification/test, and manufacturing test. You can add sensor and high-voltage measurement capability to your device with SCC or SCXI signal conditioning modules. The included NI‑DAQmx driver and configuration utility simplify configuration and measurements.
-
product
PXI-8431, 4-Port, RS485/RS422 PXI Serial Interface Module
778985-01
4-Port, RS485/RS422 PXI Serial Interface Module - The PXI‑8431/4 is a high-performance interface for high-speed communication with RS485 and RS422 devices. It features high-performance DMA transfers, multithreading, and multiprocessor support. You can also select between 4‑ and 2‑wire transceiver modes for full- and half-duplex communication. NI serial interfaces also appear as standard COM ports for compatibility with programs that use serial communications.
-
product
PXIe-4113, 2-Channel, 10 V, 6 A PXI Programmable Power Supply
782857-02
The PXIe‑4113 is a programmable DC power supply with isolated outputs. It helps simplify the task of designing automated test systems for a wide range of applications—from aerospace and defense to automotive and component test—by eliminating the need to mix multiple instrumentation form factors in a given test rack. It also has standard output disconnect functionality that allows isolation from the device under test (DUT) when not in use, and remote sense to correct for losses in system wiring.
-
product
acA1440-73gc, Color GigE Vision, 1.6 MP, 73 FPS Area Scan Camera
787059-01
The acA1440-73gc is a Color Basler Ace GigE Vision Camera with a 1.6 MP resolution and a maximum image acquisition speed of 73 frames per second. The acA1440-73gc uses a IMX273 sensor and is quality tested and calibrated for high performance and reliability. This camera can be used with NI hardware and software to build machine vision systems.
-
product
PXIe-2526 , 158‐Channel, 2 A PXI Multiplexer Switch Module
780587-26
158‐Channel, 2 A PXI Multiplexer Switch Module—The PXIe‑2526 is a high‐density PXI multiplexer switch module that is ideal for routing signals within automated test systems. It uses electromechanical relays to perform immediate switch operations in either a 158x1 1‑wire or 79x1 2‑wire multiplexer topology. The PXIe‑2526 also features onboard relay counting for relay monitoring.
-
product
GPIB-RS232, Instrument Control Device
779732-10
The GPIB‑RS232 is an IEEE 488 controller device for computers with an RS232 port. You can use this device to integrate an instrument into your system using GPIB. This device transforms a computer with an RS232 serial port into a talker, listener, or controller on the GPIB bus. It can also interface RS232 instruments and peripherals to the GPIB bus. It can implement the physical and electrical specifications of the IEEE 488 and RS232 standards, as well as interpret and execute high-level commands from the serial port, including RS232‑to‑GPIB and GPIB‑to‑RS232 protocol conversions. This device is IEEE 488.2 compatible. The device includes a license for the NI‑488.2 driver software, providing maximum reliability for connecting to third-party instruments with GPIB.
-
product
ISC-1780, VGA, 1.58 GHz Processor, Monochrome/Color Smart Camera
785143-01
The ISC‑1780 is a high-performance smart camera for machine vision and is powered by a 1.58 GHz dual-core Intel Celeron processor. The combination of the onboard processor with a CMOS image sensor provides an easily distributed all‑in‑one system. In addition to high-performance image acquisition and processing, you can use built-in digital I/O and industrial communication options for dynamic, real-time communication and integration with industrial automation devices including programmable logic controllers (PLCs), human machine interfaces (HMIs), robotics, sensors, and industrial machinery. You can configure NI Smart Cameras with the included Vision Builder for Automated Inspection (AI) software or program the camera with the LabVIEW Real‑Time Module and the Vision Development Module.
-
product
PCI-8513, 1‑Port, Software‑Selectable/FD CAN Interface Device
780684-01
1‑Port, Software‑Selectable/FD CAN Interface Device—The PCI‑8513 is a controller area network (CAN) flexible data-rate (FD) interface for developing applications with the NI‑XNET driver. NI‑XNET software-selectable CAN interfaces offer the best flexibility for CAN development with onboard transceivers for high-speed/FD, low-speed/fault-tolerant, and single-wire CAN as well as any external transceiver. The PCI‑8513 excels in applications requiring real‑time, high‑speed manipulation of hundreds of CAN frames and signals such as hardware‑in‑the‑loop simulation, rapid control prototyping, automation control, and more. The NI‑XNET device‑driven DMA engine enables the onboard processor to move CAN frames and signals between the interface and the user program without CPU interrupts.
-
product
Cable Assy, Ethernet, Type E, Crossover, 8POS, CAT5, 5m
187375-05
8-Pin, Male Ethernet to 8-Pin, Male Ethernet, CAT-5E Crossover Ethernet Cable - The 8M-8M Crossover Cable directly connects two devices together, without the need for a router in the middle. The cable is available in different lengths.
-
product
NI-9222 , ±10 V, 500 kS/s/ch, 16-Bit, Simultaneous Input, 4-Channel C Series Voltage Input Module
783283-01
±10 V, 500 kS/s/ch, 16-Bit, Simultaneous Input, 4-Channel C Series Voltage Input Module - The NI‑9222 performs differential analog input. This module is well suited for applications such as ballistics, impact, and blast wave testing. The NI‑9222 can sample at the maximum sample rate per channel while the module next to it samples at a much slower rate, which is ideal for mixed-measurement test systems. There are two connector options for the NI‑9222: a 10‑position screw terminal or a 25‑pin D‑SUB connector.
-
product
sbRIO-9227, Non-Enclosed, 50 kS/s/ch, 5 Arms, 24-Bit, 4-Channel C Series Current Input Module
781118-01
Non-Enclosed, 50 kS/s/ch, 5 Arms, 24-Bit, 4-Channel C Series Current Input Module - The sbRIO‑9227 was designed to provide high-accuracy measurements to meet the demands of data acquisition and control applications. It includes built-in anti-aliasing filters. When used with a C Series Voltage Input Module, the sbRIO‑9227 can measure power and energy consumption for applications such as appliance and electronic device test. You can not only measure and meter current and power but also look at quality factors such as noise, frequency, and harmonics. Non-enclosed modules are designed for OEM applications.
-
product
PXI-8511, 1‑ or 2-Port, Low-Speed/Fault Tolerant PXI CAN Interface Module
780686-02
1‑ or 2-Port, Low-Speed/Fault Tolerant PXI CAN Interface Module—The PXI‑8511 is a fault-tolerant Controller Area Network (CAN) interface for developing applications with the NI‑XNET driver. The PXI‑8511 excels in applications requiring real-time, high-speed manipulation of hundreds of CAN frames and signals, such as hardware‑in‑the‑loop simulation, rapid control prototyping, bus monitoring, automation control, and more. The NI‑XNET device-driven DMA engine enables the onboard processor to move CAN frames and signals between the interface and the user program without CPU interrupts, minimize message latency and freeing host processor time for processing complex models and applications.
-
product
PXI-5114, 125 MHz, 250 MS/s, 8-Bit PXI Oscilloscope, 64 MB
779466-02
125 MHz, 250 MS/s, 8-Bit PXI Oscilloscope—The PXI‑5114 low-cost PXI oscilloscope has two channels with flexible settings for coupling, impedance, voltage range, and filtering. PXI Oscilloscopes also feature a number of triggering modes, deep onboard memory, and an instrument driver that includes data streaming and analysis functions. This device is ideal for applications with fast signals that require flexible measurement configurations and up to 125 MHz of analog bandwidth. The PXI‑5114 also features PXI synchronization and data streaming capabilities.
Parent
-
Emerson Electric Co.
Manufactures products and provides engineering services for industrial, commercial, and consumer markets.
Siblings
-
Greenlee Tools
A leading manufacturer of high-quality tools for professionals, particularly in the electrical, plumbing, and construction industries
Siblings
-
Digilent Inc.
Digilent (an Emerson company) has created hardware and software to allow engineers, researchers, and scientists flexibility to design rapidly and test the world around them. Our customizable solutions will accelerate development time for even the most experienced professionals, while maintaining low barrier to entry for advancing engineers.
Siblings
-
Emerson Rosemount
Emerson's tireless pursuit of innovation drives the Rosemount™ portfolio of superior quality measurement and analytical technologies to provide customers with insight across all touch points needed to operate efficiently, safely, and with peace of mind.
Children
-
Phase Matrix, Inc
Phase Matrix, Inc. designs and manufactures RF and microwave test-and-measurement (T&M) instruments and is a wholly owned subsidiary of National Instruments Corp. Our array of instruments includes traditional benchtop frequency counters, modular (VXI) pulsed-frequency counters, modular (VXI and PXI) synthetic instruments, including downconverters, upconverters/synthesizers and local oscillators that are designed for both commercial and military applications.
Children
-
Kistler Instrument Corp.
Kistler develops, manufactures and distributes sensors for measuring pressure, force, torque and acceleration, as well as electronics and software.
Children
-
Optimal+
Provides the semiconductor industry with unique and automated test management software tools to improve global and distributed test operations, quality, reliability, utilization and yield.
Children
-
NH Research, Inc.
NH Research (NHR) enables electrification by accelerating innovation, validation and functional test of today’s technologies. Backed by over 50 years of experience in power conversion and electrification test systems NHR provides world class test instruments and systems for a wide range of industries. NHR solutions provide performance and safety that engineers and researchers desire to reduce test time and increase energy savings of their test systems. NHR was acquired by NI in 2021. Together, NHR and NI offer more complete and open electrification solutions to optimize test workflows and accelerate time to market for our customers.
Children
-
VI Control Systems Ltd.
VI Control Systems offers years of experience in software and hardware development of controls for complex systems such as linear accelerators and pulse-power systems, data acquisition in difficult environments and sophisticated data analysis.
Children
-
SET GmbH
SET GmbH is your specialist and partner for development in the field of semiconductor test systems, HiL and functional test systems for the aerospace industry, as well as in electronics development and electronics manufacturing. We have been constantly growing since its founding in 2001 and have been part of Emerson’s Test & Measurement Business NI since 2023. In addition to our know-how, the technical skills of our employees and an authentic value system, we have been convinced since the beginning that we are making customers support and making them successful. Our renowned customers and the large number of successfully completed projects from the aviation and semiconductor industries confirm our conviction and we are always pleased to be part of these projects and successes.
Children
-
MFJ Enterprises, Inc.
Manufacture's 1000 different ham radio products including products from Ameritron, HyGain, Mirage and Vectronics.
Related
-
Virginia Panel Corporation
Virginia Panel Corporation (VPC) provides VPC provides Interconnect Solutions that enable simultaneous connection of multiple test and measurement signal types through one modular interface. Designed to accommodate signal, power, RF, thermocouple, pneumatic/vacuum, and fiber optic connector modules in multiple configurations, VPC’s innovative products meet the demands of test & measurement interconnect requirements.
-
ADVINT, LLC
ADVINT is a leader in design and build of automatic test systems for military and commercial applications. We are a full-service system integrator that provides hardware/software development and complete fabrication services. We supply cost-effective rapid system development with unsurpassed customer responsiveness. Consultation to complete turnkey solutions available.
-
Lake Shore Cryotronics, Inc.
Supporting advanced scientific research, Lake Shore is a leading global innovator in measurement and control solutions.
-
SET GmbH
SET GmbH is your specialist and partner for development in the field of semiconductor test systems, HiL and functional test systems for the aerospace industry, as well as in electronics development and electronics manufacturing. We have been constantly growing since its founding in 2001 and have been part of Emerson’s Test & Measurement Business NI since 2023. In addition to our know-how, the technical skills of our employees and an authentic value system, we have been convinced since the beginning that we are making customers support and making them successful. Our renowned customers and the large number of successfully completed projects from the aviation and semiconductor industries confirm our conviction and we are always pleased to be part of these projects and successes.
-
S5 Solutions
S5 Solutions is a National Instruments system integrator. We specialize in the development of hardware-interfacing products that meet the challenge of today's sophisticated software requirements.
