Abaco Systems Inc
With more than 30 years of experience, Abaco Systems is the global leader in open architecture rugged embedded systems. We deliver market-leading commercial off-the-shelf and custom products, together with best in class program lifecycle management. This, together with our 800+ professionals’ unwavering focus on our customers’ success, reduces program cost and risk, allows technology insertion with affordable readiness and enables platforms to successfully reach deployment sooner and with a lower total cost of ownership. With an active presence in hundreds of national asset platforms on land, sea and in the air, Abaco Systems is trusted where it matters most.
- 1-866-652-2226
- 8800 Redstone Gateway
SW, Ste 200
Huntsville, AL 35808
United States of America
Categories
-
product
FPGA Mezzanine Card
FMC424
Electrically compliant with the VITA 57.1 standard, the FMC424 is compatible with Abaco Systems' FPGA carrier cards offering high pin count connectors. It also allows for the option to stack an additional FMC over it.
-
product
FPDP XMC/PMC Module
SPR507B
Designed for applications where the sensor is geographically remote from the backend processor, the SPR507B combines high performance technologies with flexible integration options to deliver remote data at high speeds with accuracy and reliability.
-
product
Mezzanine System
5093
ECM P/N 5093 provides 2 independent full bridge circuits. The two full bridge circuits can be used together to drive one small two phase stepper motor. Each full bridge circuit can drive one small dc motor or other bipolar load. Note all inductive loads should employ transient protection.
-
product
Digital Output Board
VME-2533
VME-2533 32-bit Differential Digital Output Board. VMEbus specification compatible double height form factor.
-
product
Digital I/O Board
3512
The 3512 is an eight channel non-isolated digital I/O board with +5V tolerant 74LCX14 inputs with hysteresis and +3.3V CMOS 74LVTH125 driven outputs. Each I/O line features a series 10 ohm damping and protection resistor and a 4.7K pull up resistor to +3.3V. On power up the outputs are tri-stated, and can then be enabled on a bit by bit basis. Output high drive is 32mA @ 2.0V minimum. Output low drive is 32mA @ 0.8V maximum.
-
product
Cable
RCONQPMC-1
RRCONQPMC-1 - Transitions from a SCSI-68 pin connector to two CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O.
-
-
product
FPGA Mezzanine Card
FMC407
The FMC407 is a low noise clock generation and distribution module with eight clock outputs and eight trigger outputs that are fully synchronized.There are two configurations: 34.375MHz-200MHz or 34.375MHz-4.4GHz. The FMC407 is ideal for applications that require synchronous A/D or D/A sampling across multiple cards or systems.
-
product
18" Ribbon Cable
RCONM50-D25-2
An 18" ribbon cable transitions from individual IP Module ribbon connectors on the PCI carrier board to a 25 pin female D-sub connector mounted on a PC expansion card end-panel.
-
product
FPGA Mezzanine Card
FMC120
The FMC120 provides four 16-bit A/D channels up to 1Gsps, four16-bit D/A channels up to 1.25Gsps and up to 2.8Gsps sample rate with interpolation. The devices can function up to 1Gsps during simultaneously D/A and A/D operation as the clock source is shared.
-
product
Mezzanine System
5181 MMS ECM
ECM P/N 5181 uses TI TLV320AIC23 high resolution audio codecs to provide two channels of Audio input and two channels of Audio output. Each input channel consists of two inputs a left and a right, and each output channel consists of two outputs left and right. The outputs are muteable.
-
product
Wideband Digital Receiver/Exciter
SPR870A
The SPR870A builds on Abaco Systems' extensive experience and expertise in digital receiver solutions and provides a rugged solution that can significantly reduce NRE and time-to-market
-
product
12" Cable
CONA615-2
A 12" cable transitions from an ARINC 615 Data Loader Cable Connector (JT01RE-18A-53S) to an ARINC 603 Airborne Computer Connector (MS24266R-18B-31P)
-
product
FPGA Card
PC820
The PC820 is a high-performance, PCI Express card with advanced DSP capabilities and multiple I/O options. It supports one FMC+ VITA 57.4-compliant HPC FPGA Mezzanine Card (FMC) that is closely coupled to the Virtex or Kintex UltraScale FPGA and a DDR4-2133 SDRAM SO-DIMM. The PC820s PCIe Gen3 interface can support up to eight lanes.
-
product
VMEbus Repeater Link
VME-REPEAT-A-L
The VME-REPEAT-A-L is a two-board set which allows VMEbus slave I/O boards residing in one VMEbus chassis to be controlled by a VMEbus master residing in another chassis. The VMEbus chassis in which VMEbus masters reside is referred to as a master chassis, while the VMEbus slave boards reside in a slave chassis.
Parent
-
AMETEK Inc.
AMETEK is a global leader in electronic instruments and electromechanical devices. AMETEK consists of two operating groups: Electronic Instruments - a leader in the design and manufacture of advanced instruments for the aerospace, power, process and industrial markets. Electromechanical - a differentiated supplier of electrical interconnects, precision motion control solutions, specialty metals, thermal management systems, and floor care and specialty motors.
Siblings
-
Ametek Compliance Test Solutions
AMETEK-CTS is a global leader in EMC compliance testing and RF power amplifiers. AMETEK has been designing and manufacturing precision instruments for more than 50 years. Under the brand names of EM TEST, Teseq, IFI and Milmega the company produce a wide range of specialist solutions aligned to the individual needs of equipment manufacturers across a variety of industries.
Siblings
-
MOCON, Inc.
AMETEK MOCON is the global leader in the design, development, manufacture, and support of gas measurement and control instruments and services
Siblings
-
AMETEK Measurement & Calibration Technologies Division
Measurement & Calibration Technologies provides calibration instruments for temperature, pressure and process control. It also is a leader in level measurement devices, continuous position sensors, hardness testers, force measurement devices and retractable cord reels. In addition, it offers a line of weathering test instrumentation along with laboratory and outdoor testing services.
Siblings
-
Ametek Materials Analysis Division
The AMETEK Materials Analysis Division´s goal is to be the recognized market leading provider of world-class analytical systems, nuclear instrumentation and digital imaging solutions.
Siblings
-
Process & Analytical Instruments division of AMETEK
Process & Analytical Instruments is a leader in analyzers, monitors and other instruments used by oil, gas, chemical/petrochemical, pharmaceutical, semiconductor, factory automation and other process industries. In addition, it offers a wide range of oil field and laboratory testing instruments, infrared temperature measurement devices, subsea and ultra-deep water fluid and flow measurement equipment, and specialized sampling, extraction, transport and conditioning systems.
Siblings
-
Ultra Precision Technologies Division of Ametek
Ultra Precision Technologies is a leader in the development of ultra precise measurement devices and precision machining systems. It also is a leader in ophthalmic instruments and eye care diagnostic devices, optical lens manufacturing equipment, vibration cancellation systems and enclosures, and advanced scanners used in reverse engineering, quality assurance and 3D printing.
Siblings
-
AMETEK Programmable Power, Inc.
Located in San Diego, CA, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
Siblings
-
Ametek Power Instruments
AMETEK Power Instruments serves the world-wide electric power generation and distribution industries with our advanced instruments and monitoring systems. We offer an extensive sales and service network around the globe including the US, UK and Asia. We can provide fault recorders, power line carriers, high accuracy revenue meters, alarm management and much more for your power generation, transmission and distribution needs. Our engineers have decades of design experience and work with each client to meet their stringent requirements. AMETEK Power Instruments has over 50 years of experience partnering with leading Fortune 500 companies.
Siblings
-
AMETEK Thermal Process Management
Thermal Process Management (TPM) is a Business Unit in the Process Analytical and Instrumentation Division of AMETEK. TPM is comprised of 5 companies with unique and distinguished product solutions, leading share in their respective market space, and operating with considerable market synergies. TPM manufactures industry leading thermal management systems, winterization solutions for instrumentation, and process extraction, transport, and conditioning systems.
Siblings
-
Barben Analytical
AMETEK® Barben Analytical is a market-leading supplier of analytical measurement solutions for the process industries. We design, manufacture, and sell a broad range of industrially hardened instruments, including pH and ORP electrochemical sensors, as well as gas and liquid phase optical oxygen analyzers.
Siblings
-
Ametek Spectro Scientific
Spectro Scientific, an ISO 9001:2008 company, specializes in analytical tools and software for machine condition monitoring. The company is one of the largest suppliers of oil and fuel analysis instruments to industry and the military worldwide. Industry clients include petrochemical, mining, marine and power generation companies as well as commercial testing laboratories. Spectro Scientific’s extensive product offerings include spectrometers for wear metal analysis, lubricant degradation and contamination analyzers, particle analysis instruments and complete turnkey systems for oil or fuel analysis laboratories, all managed by its SpectroTrack software platform.
Siblings
-
Haydon Kerk Pittman
Haydon, Kerk and Pittman are three world class AMETEK brands that supply advanced linear and rotary motion solutions to a diverse mix of global customers. We are recognized as a leading manufacturer of brushed and brushless DC motors, stepper motor based linear actuators, precision Acme lead screw and anti-backlash nut assemblies, linear rail and guide systems, gearmotors, drives and complete custom automation sub-systems.
Siblings
-
NSI-MI Technologies
NSI-MI Technologies is the leading global supplier of antenna, RF, and microwave testing equipment. With a team of highly respected technical experts, we are committed to providing top-notch engineering solutions and advanced products for a wide range of industries that require precise measurement, motion control, and data acquisition.
Siblings
-
United Electronic Industries, Inc.
Produces data acquisition hardware, signal conditioning and support software as needed in today's sophisticated, demanding test environments...
Siblings
-
RTDS Technologies
Being the first of its kind, the RTDS® Simulator is the world’s benchmark for performing real time power system simulation. With satisfied customers in 42 countries across the globe and over 1400 units in operation, RTDS Technologies is the undisputed world leader in our craft. We introduced the world’s very first fully digital real time power system simulator in 1989. RTDS Technologies continues to lead the way with our world-class, in-house research and development department. Our company is committed to innovation. We are continually developing our hardware, software, and support services in response to the needs of our customers.
