ICP DAS USA, Inc.
We seek to provide our customers with cost effective, flexible, and easy to use solutions for their Data Acquisition and Embedded Control Applications.
- 1-888-971-9888
1-346-292-9998 - sales@icpdas-usa.com
- 9804 Whithorn Dr.,
Houston, TX 77095
United States of America
-
Product
I-7000 Remote Data Acquisition Modules Via RS-485 / DCON Protocol
-
The ICP DAS I-7000 distributed I/O communicate over DCON ASCII Protocol over RS-485. They are available in a bevy of Digital and analog configurations, have low power consumption and require +10 ~ +30 VDC. These modules provide cost-effective protection and conditioning for a wide range of valuable industrial control system. They come with free DCON Utility configuration software for setting them up.
-
Product
PCI Daughter Boards
DB-24PR/12/DIN (with DIN-Rail mounting kit)
-
The DB-24R consists of 24 form C, electromechanical relays for efficient switching of load by programmed control. The contact of each relay can control a 0.5 A /110 V load or 1A / 24VDC. The relay is energized by applying a 5 voltage signal to the appropriate relay channel on the 50-pin Opto-22 compatible connector or D-Sub 37 connector . Twenty-four enunciator LEDs, one for each relay, light when their associated relay is activated . This board needs a +12VDC or +24VDC external power supply to avoid overloading your PC’s power supply.
-
Product
ISA Isolated Digital I/O Boards
P16R16DIO
-
The P16R16 DIO is a 16 isolated digital input and 16 relay output interface board, designed for control and sensing applications. This interface board can be easily installed in any PC/AT/XT computer. The P8R8 DIO board Provides 16 electromechanical relay outputs and 16 optically isolated inputs. The P16R16 DIO has two 37-pin D-Sub Connectors and its function is equal to two P8R8DIO boards.
-
Product
I-8000 Analog Data Acquisition Modules
-
ICP DAS offers a versatile array of analog, cartridge based I/O modules to meet the precise needs of sensitive data acquisition applications using I/W-8000 controllers. ICP offers a bevy of thermistor, thermocouple, RTD, strain gauge, and universal I/O, as well as high resolution analog output modules! Please note that more modules are available in the "serial 87k section".
-
Product
Wi-Fi Modbus TCP Data Acquisition
-
Wi-Fi Data Acquisition modules communicate over Modbus TCP and support wireless encryption. They can easily be used with SCADA software for easy and safe access.
-
Product
ISA Data Acquisition Boards
A-823PGH/S
-
The A-823PGH/L is 12-bit multifunction analog and digital I/O boards for the PC/AT compatible computer. The A-823PGH/L offer 16 single-ended or 8 differential analog inputs, plus two channels of analog output with 12-bits resolution. In addition, The A-823PGH/PGL has 16 digital input, 16 digital output , and one timer/counter channel. The A-823PGH Provides gain of 0.5, 1, 5, 10, 50 ,100 , 500 , 1000 while the A-823PGL provides gains of 0.5 , 1 , 2 , 4, 8 . It has a maximum sampling rate of 125 k Sample/Sec., DMA operation is jumper selectable for levels 1 or 3. Interrupts are jumper selectable between 3 and 15.
-
Product
ISA Motion Control
-
ICP DAS USA's ISA data acquisition boards offer cutting edge data acquisition options for your industrial control needs. The ICP DAS USA ISO and PISO data acquisition boards are available in a bevy of digital and analog configurations, which are communicable via standard PC-104 slots, as well as capable of interfacing with other modules and devices via alternate communication protocols.
-
Product
Zigbee Wireless Modbus RTU Data Acquisition
-
ZigBee is a specification based on the IEEE 802.15.4 standard for Wireless Personal Area Networks (WPANs). ZigBee operates in the ISM radio bands and is an inexpensive and self-organizing mesh network for industrial control, embedded sensing, medical data collection, smoke and intruder warning, etc. A ZigBee network consists of a Master, router/repeater and end device. We offer ZigBee converters, repeaters and ZigBee wireless I/O. Our ZigBee data acquisition products come with our FREE EZ Data Logger Software for data logging.
-
Product
FR-Net Data Acquisition
-
FRnet Protocol developed by ICP DAS is an easy to use industrial field bus offering high-speed deterministic I/O control, real I/O synchronization capabilities, and non-protocol communication. We provide FRnet remote I/O modules and high speed controllers.
-
Product
Seismic Alarm Recorders
-
ICP DAS USA brings the advanced Seismic Alarm Recorder for earthquake detection. It communicates over Modbus RTU and Modbus TCP protocols and can be used to establish an quake warning system and prevent further damages. Our Seismic Alarm Recorders can be used with our FREE EZ Data Logger Software and other SCADA software for data logging, monitoring and analysis. It can be used in museums, residential and commercial buildings, and research institutes to monitor earthquakes.
-
Product
PCI Digital I/O Boards
PISO-P32C32U
-
The PISO-P32C32/P32C32U/P32C32U-5V has 32 channels of optically isolated digital inputs and 32 channels of optically isolated digital outputs, arranged into four isolated banks. Each input channel uses a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Each digital output offers a Darlington transistor. The power supply of the input port may use the external power or the power from the PC side via DC/DC converter. The power supply of the output port should use the external power. The board eliminates ground-loop problems and isolates the host computer from damaging voltages.
-
Product
M-7000 Modbus RTU Remote Data Acquisition Modules
-
M-7000 data acquisition remote I/O modules are similar to our I-7000 modules and support both Modbus RTU and DCON protocols. They come in a wide variety of analog and digital configurations. The analog and digital I/O types they support include: current, voltage, thermistor, thermocouple, frequency, relay, strain gauge, etc.
-
Product
M-7000 Modbus RTU Remote Data Acquisition Modules
-
M-7000 data acquisition remote I/O modules are similar to our I-7000 modules and support both Modbus RTU and DCON protocols. They come in a wide variety of analog and digital configurations. The analog and digital I/O types they support include: current, voltage, thermistor, thermocouple, frequency, relay, strain gauge, etc.
-
Product
ISA Analog Output
-
ICP DAS ISA data acquisition boards offer cutting edge data acquisition options for your industrial control needs. The ICP DAS ISO and PISO data acquisition boards are available in a bevy of digital and analog configurations, which are communicable via standard PC-104 slots, as well as capable of interfacing with other modules and devices via alternate communication protocols.
-
Product
Multi-Port Serial
VEX-112i
-
The VEX-112 series card provides 2 RS-232 serial ports. It is equipped with a 128-byte hardware FIFO for each port, supports for speed up to 115200 bps and supports full-duplex communication.
